Shop headings: New Spares | Used Spares | Accessories | Brands
Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted, for models with rocker cover protectors see SSA80015. This kit will suit a V11 with standard rocker cover protectors which are much thinner than aftermarket types.
See SSA81522 for rocker cover trim retaining screws on 2v/cyl CARC models, these are not included with this kit.
More than 5 in stock
£9.00
INC VAT
£7.50 EX VAT
Sump bolt kit containing all replacement stainless steel socket cap bolts for models with a sump extension fitted. Some models e.g. Cali 1100 and series 1 Cali EV models have a sump extension fitted as standard
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). For Cali EV models check whether you have a sump extension fitted, the later one piece deep sump uses SSA80008
More than 5 in stock
£16.00
INC VAT
£13.33 EX VAT
Classic Le Mans 1 fairing cowling kit consisting of tinted screen with edging, black screen fasteners, quality replica cowling (pre drilled and manufactured exclusively for Gutsibits) in raw finish, side and lower fairing brackets.
We can also supply a headlamp ( LIA37593 or LIA37595 ), headlamp brackets, indicators and stems and most other parts you might need to turn your bike into Le Mans 1 lookalike, call or email for details.
To mount this fairing you can use 5 x FRA06016 + 5 x FRA29577 + 2 x FRA93060 - these are not included with the kit
This part is due back in stock soon, call 01484 841395 to reserve yours
£198.00
INC VAT
£165.00 EX VAT
Rocker cover screw kit containing 12 replacement stainless steel socket cap bolts for two valve small twin rocker covers. Only one kit required per engine. Only for twin throttle body V7 models
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted. This kit contains the correct screws for the Breva 750 and 2004 on V7 models but does not include the two flanged M5 screws SSA81523 that fasten the rocker cover covers to the rocker cover (on models other than the V7 Racer)
More than 5 in stock
£5.00
INC VAT
£4.17 EX VAT
Kit containing 8 long titanium shouldered retaining screws for your rocker covers. Upgrades the poor quality OE screws with shiny Ti parts
Rocker cover bolt kit for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.
More than 5 in stock
887483 MG887483
£50.00
INC VAT
£41.67 EX VAT
Screw kit containing 28 replacement stainless steel socket cap bolts for timing cover, inlet manifolds and sump pan. Only one kit required per engine. See SSA87983 and SSA89291 for special rocker cover screw kits
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070).
Add a bit of sparkle to your V7!
More than 5 in stock
£12.00
INC VAT
£10.00 EX VAT
Kit containing 8 titanium shouldered retaining screw for rocker cover. Upgrade your corrosion prone zinc OE parts with a polished upgrade.
Rocker cover bolt. We recommend that you check length of bolts on your engine before ordering as two lengths of bolt were used. Supercedes Guzzi ref. 976591
See ENA83249 for rubber sealing washer
More than 5 in stock
842291 MG842291
£40.00
INC VAT
£33.33 EX VAT
Kit containing 6 titanium shouldered retaining screw for rocker cover. Upgrade your corrosion prone zinc OE parts with a polished upgrade. Note that one bolt on each cover is hidden under a plastic cover, if you would prefer to only buy four bolts then see SSA84291
Rocker cover bolt. We recommend that you check length of bolts on your engine before ordering as two lengths of bolt were used. Supercedes Guzzi ref. 976591
See ENA83249 for rubber sealing washer
More than 5 in stock
842291 MG842291
£30.00
INC VAT
£25.00 EX VAT
Titanium shouldered retaining screw for rocker cover. 4 required for each cylinder head
Rocker cover bolt for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.
More than 5 in stock
887483 MG887483
£7.50
INC VAT
£6.25 EX VAT
Quality carbon look key ring featuring a V100 logo. Soft carbon fibre effect key fob with corrosion proof keyring. Compliments any V100
Includes a choice of rings for your key. Perfect gift for the Guzzi aficionado in your life
More than 5 in stock
£6.50
INC VAT
£5.42 EX VAT