Shop headings: New Spares | Used Spares | Accessories | Brands
Front crank oil seal for models with Bosch or Ducati charging systems
Also known as Guzz ref. 90402839
More than 5 in stock
90402840-Z
£9.50
INC VAT
£7.92 EX VAT
Rubber tank fastening strap
Used as battery strap on V11 and Daytona
More than 5 in stock
14102600-z 14102600 GU14102600 14 10 26 00
1410 2600 1410.2600 14.10.26.00
Also fits Benelli 650 Tornado
£9.50
INC VAT
£7.92 EX VAT
Side stand mounting bolt with shoulder
Sorry, this part is no longer available.
99105129 GU99105129 99 10 51 29
9910 5129 9910.5129 99.10.51.29
Sorry this item is out of production
Key for crankshaft
1 in stock
91702355 GU91702355 91 70 23 55
9170 2355 9170.2355 91.70.23.55
£9.60
INC VAT
£8.00 EX VAT
Inlet clamp for aluminium manifolds on VHB 30 and VHB 29 carbs
Also known as Guzzi ref. 13938700
This part is available by special order, request a quote
14938700 GU14938700 14 93 87 00
1493 8700 1493.8700 14.93.87.00
£9.60
INC VAT
£8.00 EX VAT
Oil pressure switch M12 thread, male spade connector
Superceded by ELA19670 . See ENA12640 for replacement crush washer if required
Sorry, this part is no longer available.
12768700 GU12768700 12 76 87 00
1276 8700 1276.8700 12.76.87.00
Sorry this item is out of production
Rotational oil seal for crownwheel carrier in drive box on post 1974 big twins. Front crank oil seal on loop frame models
Also known as Guzzi ref. 90403850 and used on 850 GT and loop frame models for front crank oil seal ( 90403851 )
More than 5 in stock
90413850 GU90413850 90 41 38 50
9041 3850 9041.3850 90.41.38.50
£9.80
INC VAT
£8.17 EX VAT
Stainless steel drain plug for drive box and gearbox, includes recess for crush washer to locate in. Also used as level plug on big twins and front sump drain on small twins.
Also known as Guzzi ref. 95980212, 95980610. Use crush washer SIA10900 with this bolt
More than 5 in stock
95980214-z 95980214 GU95980214 95 98 02 14
9598 0214 9598.0214 95.98.02.14
£9.90
INC VAT
£8.25 EX VAT
Sealed ball bearing used as rear wheel bearing for cast and spoked wheels
2 bearings required per wheel. Also used as front wheel bearing in spoked wheels on these models: Cali 1100, S3, T3, G5, Mille GT, Cali 3, Convert, Strada 1000, 1000S, Cali Jackal, Cali Stone, Cali Special (tube rim), Cali Vintage (tube rim), Cali Classic (2006-2007), 850 GT (disc braked version). Front wheel only for 750S / V7 Sport.
More than 5 in stock
92204220-z 92204220 GU92204220 92 20 42 20
9220 4220 9220.4220 92.20.42.20
£10.00
INC VAT
£8.33 EX VAT
Oil pressure sender, M12 thread, male bullet connector
Supercedes Guzzi no. 12768700. Some small twins also require adapter 19055800 (or ELA19720 can be fitted in place of this switch). Check which type your small twin uses before replacing.
See ENA12640 for replacement crush washer if required
More than 5 in stock
17768750 GU17768750 17 76 87 50
1776 8750 1776.8750 17.76.87.50
£10.00
INC VAT
£8.33 EX VAT