Brembo left hand (if mounted in front of fork leg) P08 / F08 ( P8 ) twin bleed (M6 bleed nipples) brake caliper

Also used on period Laverda and Ducati models

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 2 in stock, request a quote

 14652200 GU14652200 14 65 22 00
 1465 2200 1465.2200 14.65.22.00

Brembo right hand (if mounted in front of fork leg) and rear P08 / F08 ( P8 ) twin bleed (M6 bleed nipples) brake caliper

Also used on period Laverda and Ducati models. Rare and not available new

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 Sorry, this part is no longer available.

 14653001 GU14653001 14 65 30 01
 1465 3001 1465.3001 14.65.30.01

Brembo 3 spoke cast front wheel, 6 bolt hole disc

Also known as Guzzi ref. 05610330

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 1 in stock, request a quote

 977266 MG977266

Brembo or Marchesini 3 spoke cast rear wheel, 6 bolt hole disc

Takes a 160 wide tyre. Can be fitted as an upgrade to 1100 Sport Carb models which don't have a cush drive

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 We need to check whether we have stock of this part, check availability

 01630600 GU01630600 01 63 06 00
 0163 0600 0163.0600 01.63.06.00

Brembo or Marchesini 3 spoke cast front wheel, 6 bolt hole disc

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 We need to check whether we have stock of this part, check availability

 01610300 GU01610300 01 61 03 00
 0161 0300 0161.0300 01.61.03.00

Complete rear brake disc from Brembo, 6 hole mounting

Also known as Guzzi ref. 01635700. Always fit new brake pads when replacing a brake disc. Use disc bolt BRA30460

 This part is available by special order, request a quote

306535860

Complete twin bleed F09 (P9) front right hand (when mounted behind fork leg, otherwise use as LH) replica Brembo brake caliper. Supplied with bleed nipples, dust cover, pins and spring. This can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.

Brake pads not included- see BRA33204

 This part is available by special order, request a quote

Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipples, dust cover, pins and spring. This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.

Brake pads not included- see BRA33204

 This part is available by special order, request a quote

Brembo type PS 15 handlebar mounted front master cylinder with plastic reservoir. Use this master cylinder if you are de-linking your brakes to ensure the correct piston operating ratio (if you retain the original PS12 or PS13 your front brakes are likely to feel 'spongy')

Use brake lever BRA14605 or BRA17606 for this master cylinder. See BRA30125 for replacement part

 This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 350 Vento/Forza (1977-1985), Ducati 450 Desmo, Laverda, Hesketh

Complete reproduction Brembo P2 F05 (P5) front right hand brake caliper for small twins (when mounted behind fork leg)

Supplied without brake pads, see BRA19724 if you require these. Also known as Guzzi ref. 19652336

 This part is available by special order, request a quote

 82037800 GU82037800 82 03 78 00
 8203 7800 8203.7800 82.03.78.00

Also fits Benelli 250 TS