Rebuild kit for Brembo Goldline Calipers with 34mm / 30mm pistons. Contains seals, brake grease and instructions in English. One kit required per caliper. Also suitable for some Ducati / Aprilia models.

Caliper seal kit

 2 in stock

Polished aluminium handlebar brake lever for Brembo master cylinder

Supercedes Guzzi ref. 856048

 This part is available by special order, request a quote

 896346 MG896346

Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons

A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752

 More than 5 in stock

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Four way brake manifold for linked brakes in black. Acts as splitter for models without proportioning valve

Brembo ref. 06.2372.10

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 We need to check whether we have stock of this part, check availability

 17668050 GU17668050 17 66 80 50
 1766 8050 1766.8050 17.66.80.50

Brembo pad spring kit for Brembo P4 30/34F calipers with two pad pins

Brembo ref. 04501220

 This part is available by special order, request a quote

 01659131 GU01659131 01 65 91 31
 0165 9131 0165.9131 01.65.91.31

Microswitch for clutch lever. This part differs from the OE part in that it has bullet connectors and a slightly shorter lead. The OE part is available by special order for around £100 more.

Brembo ref. 110467184

 This part is available by special order, request a quote

AP8113998

Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs

Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Brembo front brake master cylinder cap and seal. Complete with instructions and replacement screws.

Brembo ref. 110270491

 This part is available by special order, request a quote

 05661130 GU05661130 05 66 11 30
 0566 1130 0566.1130 05.66.11.30

Polished Brembo aluminium brake lever

Also known as Guzzi ref. 10270652. Brembo ref. 110489431, AP8161262. Can be used instead of adjustable lever BRA81510 for Breva 1200, 1200 Sport, Norge etc... Replaces Guzzi ref. 2B003821 and 2B003041

 This part is due back in stock soon, call 01484 841395 to reserve yours

 03605645 GU03605645 03 60 56 45
 0360 5645 0360.5645 03.60.56.45

Black Brembo brake lever

Can be used instead of adjustable lever BRA81510 for Breva 1200, 1200 Sport, Norge etc... Will also fit Cali EV (2002-2006), Breva 750, Nevada 750 (2004-2013), mk 1 V7 models, all V7 III, all V9's, Cali Stone and Cali Vintage

 1 in stock

2B001926