Gearbox input seal and output shaft oil seal on big twins, fork seal on Nuovo Falcone. Used as crownwheel shaft oil seal on small twins. Output seal only on 4 speed gearboxes

Supercedes Guzzi ref. 90403547. Used as crownwheel carrier seal on small twins Also known as Guzzi ref. 90403549

 More than 5 in stock

 90403548 GU90403548 90 40 35 48
 9040 3548 9040.3548 90.40.35.48

Fork dust cover for Marzocchi M1R fork stanchion

Also used on Ducati Paso 750 (1982-1992), 906 Paso and 907 IE

 This part is available by special order, request a quote

 30524500 GU30524500 30 52 45 00
 3052 4500 3052.4500 30.52.45.00

1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

 More than 5 in stock

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock

1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527

Fork seal for Marzocchi M1R forks

 More than 5 in stock

30530502-z 30530502 GU30530502 30 53 05 02
 3053 0502 3053.0502 30.53.05.02

Also fits Laverda SFC1000

Stainless steel M10 dome head nut, used for fork slider pinch bolt and other applications

 More than 5 in stock

 92602210 GU92602210 92 60 22 10
 9260 2210 9260.2210 92.60.22.10

A2 stainless socket cap screw M10 x 55mm, many applications including lower yoke fork clamp bolts on Tonti models

Also known as Guzzi ref. 98620555

 More than 5 in stock

98072555-z 98072555 GU98072555 98 07 25 55
 9807 2555 9807.2555 98.07.25.55

A2 stainless socket cap screw M10 x 35, many applications - used for top yoke pinch bolts on big twins and fork slider to damper retaining bolts on Tonti models (35mm forks)

 More than 5 in stock

 98622535 GU98622535 98 62 25 35
 9862 2535 9862.2535 98.62.25.35

A2 stainless socket cap screw M10 x 40, used for fork slider pinch bolts on 35mm big twin forks and 32mm small twin forks

 More than 5 in stock

 98620540 GU98620540 98 62 05 40
 9862 0540 9862.0540 98.62.05.40