Shop headings: New Spares | Used Spares | Accessories | Brands
13 Results - Page 1 of 2
Brake pad spring for single pin Brembo Goldline 30/34 calipers
Also suitable for some Ducati / Aprilia models. Brembo ref. 98.8248.50
1 in stock
20419685 GU20419685 20 41 96 85
2041 9685 2041.9685 20.41.96.85
£12.00
INC VAT
£10.00 EX VAT
Brembo pad pin kit for Brembo F05 (P5) calipers. Contains one long pin, two short and retaining spring
Brembo ref. 120280010, also used on some Laverdas . Front calipers only on Strada
More than 5 in stock
39659100 GU39659100 39 65 91 00
3965 9100 3965.9100 39.65.91.00
Also fits Benelli 250 TS
£19.50
INC VAT
£16.25 EX VAT
Pad pin kit for Brembo P2 F08 (P8) calipers, consists of two long pins, one short and retaining spring.
replaces old Guzzi part ref. 14659100. Brembo ref. 120274210. NB finish on long pins may be zinc or black
This part is due back in stock soon, call 01484 841395 to reserve yours
14659100 GU14659100 14 65 91 00
1465 9100 1465.9100 14.65.91.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£19.85
INC VAT
£16.54 EX VAT
Brembo pad pin kit for Brembo P30/34F calipers, contains single pad pin, pad spring and clip
Brembo ref. 120280061
1 in stock
20280061 GU20280061 20 28 00 61
2028 0061 2028.0061 20.28.00.61
£21.00
INC VAT
£17.50 EX VAT
Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow
This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250
3 in stock
Also fits Cagiva Elefant E750, Ducati 748
£26.00
INC VAT
£21.67 EX VAT
Brembo anti-rattle spring kit for Brembo rear caliper, holds rear pads in place
Sorry, this part is no longer available.
05659030 GU05659030 05 65 90 30
0565 9030 0565.9030 05.65.90.30
Sorry this item is out of production
Brembo brake master cylinder overhaul kit for handlebar, undertank (cable operated) mounted, handlebar mounted and rear PS 12 master cylinders. Contains seals, brake grease, spring and piston. PS12 handlebar master cylinder fitted to early 850 and 1000 models. PS12 rear master cylinder fitted to Nevada 750
This seal kit is also known as 082039797. NB repair kit instructions refer to rear master cylinder. To fit this to a PS12 handlebar mounted cylinder you will need to punch the old piston out using a thin drift through the hole at the banjo bolt end of the master cylinder. Carefully note the order of the ring and washer as the piston comes out and replace with components from kit. Brembo no. 110279720. See this link for help with fitting this kit
More than 5 in stock
17659352 GU17659352 17 65 93 52
1765 9352 1765.9352 17.65.93.52
Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda Montjuic, Harris F1
£28.50
INC VAT
£23.75 EX VAT
Brembo pad spring kit for Brembo P4 30/34F calipers with two pad pins
Brembo ref. 04501220
This part is available by special order, request a quote
01659131 GU01659131 01 65 91 31
0165 9131 0165.9131 01.65.91.31
£36.00
INC VAT
£30.00 EX VAT
Profesionally rebuilt Brembo PS 15 rear master cylinder for models with a remote reservoir. Mounting holes at 50mm centres.
Brembo ref. 10.2934.02
Usually supplied as a bare master cylinder with a piston installed. Spring, operating lever and input elbow may not be included. See BRA19500 for the elbow that the fluid supply pipe fits on to and BRA19667 for the return spring. Send us your old rebuildable (i.e. with a undamaged bore) PS15 for a £10 credit against your next order.
19667000 GU19667000 19 66 70 00
1966 7000 1966.7000 19.66.70.00
£80.00
INC VAT
£66.67 EX VAT
Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipples, dust cover, pins and spring. This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
Brake pads not included- see BRA33204
This part is available by special order, request a quote
£145.00
INC VAT
£120.83 EX VAT