Shop headings: New Spares | Used Spares | Accessories | Brands
13 Results - Page 1 of 2
Complete Brembo F08 (P8) right hand (when mounted behind fork leg, otherwise use as LH) and rear Brembo brake caliper when mounted in underslung position (under and in front of wheel spindle). Supplied with bleed nipple, dust cover, pins, spring and a pair of brake pads, this is a replacement for the Brembo P8 single and twin bleed caliper
Supplied ready to bolt on and bleed. Also known as Guzzi ref. 18652201, 080137806. Ducati ref. 079937800.
This part is due back in stock soon, call 01484 841395 to reserve yours
17652360 GU17652360 17 65 23 60
1765 2360 1765.2360 17.65.23.60
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT
Complete Brembo F08 (P8) front left hand (when mounted behind fork leg, otherwise use as RH) Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipple, dust cover pins and spring, this is a replacement for the Brembo P8 single and twin bleed caliper. This can also be used as a replacement for the P9 caliper used on the 1000 SP rear
Supplied ready to fit and bleed. Also known as Guzzi ref. 28653301, 28652301. Ducati ref. 079937806
This part is due back in stock soon, call 01484 841395 to reserve yours
18652201 GU18652201 18 65 22 01
1865 2201 1865.2201 18.65.22.01
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT
Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipples, dust cover, pins and spring. This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
Brake pads not included- see BRA33204
This part is available by special order, request a quote
£145.00
INC VAT
£120.83 EX VAT
Complete twin bleed F09 (P9) front right hand (when mounted behind fork leg, otherwise use as LH) replica Brembo brake caliper. Supplied with bleed nipples, dust cover, pins and spring. This can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
Brake pads not included- see BRA33204
This part is available by special order, request a quote
£145.00
INC VAT
£120.83 EX VAT
Profesionally rebuilt Brembo PS 15 rear master cylinder for models with a remote reservoir. Mounting holes at 50mm centres.
Brembo ref. 10.2934.02
Usually supplied as a bare master cylinder with a piston installed. Spring, operating lever and input elbow may not be included. See BRA19500 for the elbow that the fluid supply pipe fits on to and BRA19667 for the return spring. Send us your old rebuildable (i.e. with a undamaged bore) PS15 for a £10 credit against your next order.
19667000 GU19667000 19 66 70 00
1966 7000 1966.7000 19.66.70.00
£80.00
INC VAT
£66.67 EX VAT
Brembo pad spring kit for Brembo P4 30/34F calipers with two pad pins
Brembo ref. 04501220
This part is available by special order, request a quote
01659131 GU01659131 01 65 91 31
0165 9131 0165.9131 01.65.91.31
£36.00
INC VAT
£30.00 EX VAT
Brembo brake master cylinder overhaul kit for handlebar, undertank (cable operated) mounted, handlebar mounted and rear PS 12 master cylinders. Contains seals, brake grease, spring and piston. PS12 handlebar master cylinder fitted to early 850 and 1000 models. PS12 rear master cylinder fitted to Nevada 750
This seal kit is also known as 082039797. NB repair kit instructions refer to rear master cylinder. To fit this to a PS12 handlebar mounted cylinder you will need to punch the old piston out using a thin drift through the hole at the banjo bolt end of the master cylinder. Carefully note the order of the ring and washer as the piston comes out and replace with components from kit. Brembo no. 110279720. See this link for help with fitting this kit
More than 5 in stock
17659352 GU17659352 17 65 93 52
1765 9352 1765.9352 17.65.93.52
Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda Montjuic, Harris F1
£28.50
INC VAT
£23.75 EX VAT
Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow
This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250
3 in stock
Also fits Cagiva Elefant E750, Ducati 748
£26.00
INC VAT
£21.67 EX VAT
Brembo anti-rattle spring kit for Brembo rear caliper, holds rear pads in place
Sorry, this part is no longer available.
05659030 GU05659030 05 65 90 30
0565 9030 0565.9030 05.65.90.30
Sorry this item is out of production
Brembo pad pin kit for Brembo P30/34F calipers, contains single pad pin, pad spring and clip
Brembo ref. 120280061
1 in stock
20280061 GU20280061 20 28 00 61
2028 0061 2028.0061 20.28.00.61
£21.00
INC VAT
£17.50 EX VAT