Shop headings: New Spares | Used Spares | Accessories | Brands
210 Results - Page 17 of 21
Engine guard kit developed to protect both header pipes and cylinder head. A pair of lightweight ice grey finish aluminium head guards. These include a shock-absorbing pad to protect the head, rocker covers and exhaust headers from low speed impacts.
Lower profile than a conventional crashbar these are an essential piece of kit for your V100 which will help protect expensive engine and exhaust components in the unfortunate event of a low speed spill. Tested by Mistral.
Fit yours before you need them!
See this video for installation instructions. Note that black protectors are shown in second photo.
1 in stock
£215.00
INC VAT
£179.17 EX VAT
Pair of high quality large bore exhaust header pipes for standard Le Mans exhaust systems. Finished in polished stainless and made in Mandello these downpipes have been developed specifically for the Le Mans and are an excellent choice for bikes that will be ridden. Separate exhaust collets not required with these downpipes.
Hand made to order in Italy
Note that there is no crosspipe joining these downpipes as they are designed to fit with EXA50010 on Le Mans 1 and 2 models, polished and satin finish downpipes with crosspipe are available by special order
This part is available by special order, request a quote
£215.00
INC VAT
£179.17 EX VAT
Pair of Italian made stainless steel downpipes in a satin finish
Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA16129
Exhaust collets not required.
NB does not include exhaust clamps. For clamps see EXA36900
This part is available by special order, request a quote
14120906+14120901
£215.00
INC VAT
£179.17 EX VAT
Pair of Italian made stainless steel downpipes in a satin finish
Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA03900
Exhaust collets not required.
NB does not include exhaust clamps. For clamps see EXA36900
This part is available by special order, request a quote
14120906+14120901
£215.00
INC VAT
£179.17 EX VAT
Pair of Italian made stainless steel downpipes in a polished finish.
Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA16028
Exhaust collets not required
NB does not include exhaust clamps. For clamps see EXA36900
This part is available by special order, request a quote
14120906+14120901
£215.00
INC VAT
£179.17 EX VAT
Pair of Italian made stainless steel downpipes in a polished finish
Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA03900
Exhaust collets not required.
NB does not include exhaust clamps. For clamps see EXA36900
This part is available by special order, request a quote
£215.00
INC VAT
£179.17 EX VAT
HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434.
Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
1 in stock
£160.00
INC VAT
£133.33 EX VAT
HIgh performance aluminium velocity stack for airbox to throttle body union on single throttle body models. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434.
Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
This part is available by special order, request a quote
£140.00
INC VAT
£116.67 EX VAT
HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10433 and V-Twin Boost - ACA85001 or ACA85002.
Customer Kev fitted this combo and called us the next day to say that his V85TT was transformed; the fluffy throttle response between 2k and 3k was gone and the engine pulled better. Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
This part is due back in stock soon, call 01484 841395 to reserve yours
£140.00
INC VAT
£116.67 EX VAT
High quality standard balance pipe or crossover for standard Le Mans exhaust systems (not required on models with long silencers EXA14998 fitted). Finished in black and made in Mandello this H piece has been developed specifically for the Le Mans 1 and 2 is an excellent choice for bikes that will be ridden
Note that this is not compatible with the aftermarket Mistral Le Mans downpipes as the centres on this H pipe are too narrow to fit them. This H piece is for standard Le Mans exhaust systems
This part is available by special order, request a quote
£135.00
INC VAT
£112.50 EX VAT