Oil pressure sender, M12 thread, male bullet connector

This oil pressure sensor supercedes Guzzi no. 12768700. Some small twins also require adapter 19055800 (or ELA19720 can be fitted in place of this switch). Check which type your small twin uses before replacing.

See ENA12640 for replacement crush washer if required

 17768750 GU17768750 17 76 87 50
 1776 8750 1776.8750 17.76.87.50

Dimensions:
M12 thread, 46mm x 21mm bolt flats

Exclusive final cap is the distinct trait of this model, is obtained tanks to CNC production, anodized and recovered again in the machine to realize the final millings. We can realize the central body with polished finish, for a perfect match with original header pipes, or black painted, for who love contrasts! The exhaust are predisposed to the installation of the original heat shield, and the guarantee and excellent integration with the aesthetic line of the bike. Installation is simple and does not require modification. Technical features: Exclusive end cap: milled aluminium component with engraved logo Lower weight than the original exhausts Better performance: more torque at the lower rpms and more fluidity Engine heat reduction Average consumption reduction of 8-10% Same position of the original exhausts: compatibility with side bags and Guzzi accessories Removable DB-Killer Artisan product: quality and attention to every detail. Assembly, welding and finishing operations are exclusively handmade

 This part is available by special order, request a quote

Non magnetic gearbox and final drive level plug in zinc finish

Superceded by stainless steel plug SSA95214

 Sorry, this part is no longer available.

 95980214 GU95980214 95 98 02 14
 9598 0214 9598.0214 95.98.02.14

Dimensions:
M10 x 15mm

Oil filter change kit containing 1 x UFI oil filter, crush washers and filter cover O ring. An oil change uses 2l of engine oil, see OIA01071 for our recommended oil.

See TOA19001 for a handy tool for unscrewing your dipstick.

Dust cover for fork leg, seals against stanchion to protect fork seal

 Availability varies on this part, call us to check availability

If you would like to be emailed once this item is available again then click here

53524540-z 53524540 GU53524540 53 52 45 40
 5352 4540 5352.4540 53.52.45.40

Also fits Benelli 504

HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434

Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

 This part is available by special order, request a quote

Pair of short reverse cone polished stainless steel performance silencers from Mistral, the short upswept reverse cone design compliments the classic styling of the Cafe Classic and Racer models. Supplied with removable baffles these are more durable, stylish, lighter and better sounding than the original silencers.

Also available in satin or black finish

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand is not compatible with these silencers (unless you make up a centre stand stop bracket to prevent the stand touching the underside of the silencer). Silencer gaskets now included with these silencers
No remap required

Release the music in your Guzzi!
See this video to hear this silencer

 This part is available by special order, request a quote

Dimensions:
44mm ID at downpipe union

Pair of classic polished finish stainless steel conical silencers made in Italy by Mistral. These silencers include removable baffles and are a great performance upgrade for your Guzzi

Hand made to order in Italy
Also available in satin and black finishes

Release the music in your Guzzi!

 This part is available by special order, request a quote

Gear linkage assembly containing rose joint, rod and clevis fork. M6 male stud for the gearbox operating lever. See GEA95265 for clevis pin

Contains Guzzi refs. 28258160, 12626800, 92630106 and 95129110.

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 28257510 GU28257510 28 25 75 10
 2825 7510 2825.7510 28.25.75.10

Dimensions:
M6 threads, 48mm overall threaded M6 section in centre. 90mm - 103mm overall

Pair of Brembo 07BB1408 carbon ceramic brake pads for Brembo P2 F08 (P8) calipers

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

28654601-z 28654601 GU28654601 28 65 46 01
 2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Dimensions:
56mm x 54mm x 9mm overall