Polished aluminium blanking plate kit, use when fitting a crankshaft mounted ignition to replace the distributor

Includes O ring and two countersunk screws. See ENA90313 for replacement O ring

 This part is due back in stock soon, call 01484 841395 to reserve yours

Factory upgraded oil pump with 16mm wide teeth as fitted to later big twins. Gives increased flow and can be retro fitted to earlier 850/1000 models which originally had 14mm teeth pumps

 This part is available by special order, request a quote

 30146400 GU30146400 30 14 64 00
 3014 6400 3014.6400 30.14.64.00

Small Centenario decal celebrating 100 years of Moto Guzzi, as fitted to centenario models

 This part is available by special order, request a quote

2H004121

Pair of polished stainless steel low round silencers for carb models. Developed by Mistral for maximum performance using their in-house dyno. The classic lines compliment the styling of this model whilst internally all new components manage the gas flow to improve torque and power.

As well as looking and sounding better than the stock silencer this performance exhaust is lighter and offers a useful increase in power and torque.

Benefits of Mistral silencers:

• Simple assembly
• Low weight
• Best sound and performance
• Specific bracket included
• Classic lines to enhance your bike
• Hand made to order on the shores of Lake Como
• Easy to install using existing mounting points.
• Handcrafted product

 This part is available by special order, request a quote

Pair of polished stainless steel low round silencers for fuel injected SS models. Developed by Mistral for maximum performance using their in-house dyno. The classic lines compliment the styling of this model whilst internally all new components manage the gas flow to improve torque and power.

As well as looking and sounding better than the stock silencer this performance exhaust is lighter and offers a useful increase in power and torque.

Benefits of Mistral silencers:

• Simple assembly
• Low weight
• Best sound and performance
• Specific bracket included
• Classic lines to enhance your bike
• Hand made to order on the shores of Lake Como
• Easy to install using existing mounting points.
• Handcrafted product

 This part is available by special order, request a quote

Pair of polished stainless steel low oval silencers for fuel injected SS models. Developed by Mistral for maximum performance using their in-house dyno. The classic lines compliment the styling of this model whilst internally all new components manage the gas flow to improve torque and power.

As well as looking and sounding better than the stock silencer this performance exhaust is lighter and offers a useful increase in power and torque.

Benefits of Mistral silencers:

• Simple assembly
• Low weight
• Best sound and performance
• Specific bracket included
• Classic lines to enhance your bike
• Hand made to order on the shores of Lake Como
• Easy to install using existing mounting points.
• Handcrafted product

 This part is available by special order, request a quote

Clamp on retro style bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors. Classic oval shape can be flipped for fitting on either side and above or below the handlebars.

The Reverse Retro mirror is made from billet aluminum. Compact, classy and unmistakable design. Simple lines make it a sought-after Classic suitable for a range of styles. The adjustment system and anti-dazzle glass guarantee optimal versatility and comfort.

Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted

Perfect for that classic cafe racer look

 This part is available by special order, request a quote

Pair of stylish Kappa soft panniers, perfect for V7 and V9 models.

• 550D Polyester construction with PVC coating
• 2mm thick synthetic leather (PU) detailing
• 190D Nylon inner lining material
• 14 litre capacity for each bag
• Product complies with Reach regulations
• Roll-top closure system
• Saddlebag straps with hook and loop fastening closure
• Front handle
• Waterproof removable inner lining with thermo-sealed seams
• Strap with ring loop to fasten to double D-ring
• Front waterproof zip
• KAPPA RAMBLER logo printed on patch
• Bags come with a TNT bag with the KAPPA RAMBLER logo for storage

 Order now and we will post your order within 7 days.

Stainless steel front engine mounting stud kit. Kit contains one long engine M12 x 1.25 threaded stud (with plain section in centre), two M12 half nuts, two M12 crinkle washers and four standard M12 washers - all in A2 stainless steel

The original bolts are prone to seizing in place so we recommend replacing with this quality stainless part. Also known as Guzzi ref. 03429500, 14429505
Differs from original part whcih is a bolt, this stud make is easier to fine tune the position of the stud between header pipes

 This part is available by special order, request a quote

 14429500 GU14429500 14 42 95 00
 1442 9500 1442.9500 14.42.95.00

Complete single disc clutch kit for 5 speed big twins containing flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. Suitable for all big twins with either distributor or crankshaft mounted ignition system, not suitable for Digiplex equipped models.

This clutch upgrade has the following advanges over the old two plate clutch:

• Reduction in flywheel and clutch weight of approx. 1KG
• Improved acceleration
• Smoother gear changes at high RPM
• Quicker engine decelleration
• Reduction in engine vibration as the clutch assembly is (this is not possible with the original clutch)
• Lighter handlebar clutch lever action
• More precise clutch engagement and disengagement.
• More progressive clutch engagement.
• Increased ability to handle higher torque and horsepower.
• Lower clutch disk wear (reduced maintenance)
• Fewer parts (no intermediate plate, no second friction plate) to wear out
• Ease of assembly - gearbox can be fitted to engine without centering of the clutch disk.

 This part is due back in stock soon, call 01484 841395 to reserve yours