Deep sump spacer made from alloy. This increases the volume of air in the crankcase and helps reduce 'heavy breathing'. The oil is also better cooled when using one of these. Finished externally in silver paint

To fit this sump spacer you will need longer sump bolts (14 x SSA06055 + 4 x SSA06090) and a pair of sump gaskets (ENA14036). You will also need a longer dipstick, see ENA28005

 Availability varies on this part, check availability

 14003240 GU14003240 14 00 32 40
 1400 3240 1400.3240 14.00.32.40

Short screw in polished alloy dipstick with O ring for models without a sump extension. Can be used to replace long dipstick and tube on Le Mans 2 and 1000 SP

Will also fit V7 700, V7 Special and 850 GT if high and low levels are transposed from your old dipstick

 This part is due back in stock soon, call 01484 841395 to reserve yours

17004951-z 17004951 GU17004951 17 00 49 51
 1700 4951 1700.4951 17.00.49.51

Complete 950cc piston and Nikasil coated barrel kit including gudgeon pin, piston rings and circlips. Piston is low compression

Components for one cylinder. This kit can be fitted to a 850 crankcase if the crankcase aperture is enlarged. See similar kit ENA20050 for alternative

 Sorry, this part is no longer available.

18060102-z 18060102 GU18060102 18 06 01 02
 1806 0102 1806.0102 18.06.01.02

Long screw in polished alloy dipstick with O ring for models with a sump extension but without fairing lowers

 This part is due back in stock soon, call 01484 841395 to reserve yours

28004950-z 28004950 GU28004950 28 00 49 50
 2800 4950 2800.4950 28.00.49.50

Long screw in polished alloy dipstick with O ring for models with fairing lowers (dipstick protrudes through fairing to make oil level checking much simpler and more accurate)

Use this longer dipstick for models fitted with a sump extension, note that the dipstick extension is 80mm long which is shorter than the original part. Supplied with both O rings

 This part is available by special order, request a quote

Long screw in polished alloy thermometer dipstick with O ring for models with a sump extension. Shows oil temperature in degrees celcius

Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick

 This part is due back in stock soon, call 01484 841395 to reserve yours

28004950-z 28004950 GU28004950 28 00 49 50
 2800 4950 2800.4950 28.00.49.50

Screw in polished alloy thermometer dipstick with O ring. Shows oil temperature in degrees celcius

Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick

 This part is due back in stock soon, call 01484 841395 to reserve yours

Pair of wind deflectors in a matte finish, these fix to to your fuel tank behind the headstock to reduce buffeting at speed.

Supplied as a handed pair with black flanged screws to fitting.

 This part is due back in stock soon, call 01484 841395 to reserve yours

Hyperpro lower spring for rear shock. The black spring lowers the rear end of bike by 25mm to help you feel more comfortable on the bike. The front forks can also be dropped through the yokes to make the fitment of this spring a handling neutral change.

For the complete package see SUA85004 for a lowering kit for the forks

 This part is available by special order, request a quote

Pair of polished stainless steel exhaust reverse cone silencers with DBKillers. These quality silencers are significantly lighter than stock and improve sound, BHP and torque. They are much smaller (100mm OD) than the OE silencers and compliment the styling of the V11 Sport

Handmade to order in Italy
Supplied with brackets and removable baffles. Priced per pair, for maximum performance gains combine with Mistral crossover EXA20011
Also available in aluminium, carbon and titanium variants - call or email for prices

Release the music in your Guzzi!

Not what you're looking for? We can supply a range of silencer shapes and finishes for your model - contact us with your requirements and we'll advise on availability and price

 This part is available by special order, request a quote