Chrome finish plastic CEV 18343 type indicator with amber lens and 21W bulb

Indicator mounts available separately, see LIA19751. Also known as Ducati part 079903444.1 079903444.2

 More than 5 in stock

18750656-z 18750656 GU18750656 18 75 06 56
 1875 0656 1875.0656 18.75.06.56

Also fits Ducati Pantah, Most Ducati Bevels

Rocker cover breather pipes

Also known as Guzzi ref. 23159660, 23159670, 27159660

 4 in stock

 23159671 GU23159671 23 15 96 71
 2315 9671 2315.9671 23.15.96.71

Kit containing two replacement 60cm silicon HT leads, lead ends and 90° plug caps. The leads are suppied as a single double length lead so you can cut it into two leads of the exact required length. Includes crimp on lead ends for standard big twin 12v round coils

Suitable for most models with coils under the tank where the HT lead is not moulded into the ignition coil. We recommend checking what type of plug cap you have and measuring your existing cable run to check this part will fit

 This part is due back in stock soon, call 01484 841395 to reserve yours

Adjustable front black brake lever for PS 11, PS 13 and PS 16 rectangular master cylinder.

Also known as Guzzi ref. 28605678. See BRA01630 or BRA01640 for a span adjustable alternative and HAA10850 for lever pivot pin

 This part is due back in stock soon, call 01484 841395 to reserve yours

10270640-z 10270640 GU10270640 10 27 06 40
 1027 0640 1027.0640 10.27.06.40

Exhaust valve

Also known as Guzzi ref. 27036180

 This part is available by special order, request a quote

 27036181 GU27036181 27 03 61 81
 2703 6181 2703.6181 27.03.61.81

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   4 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

"The Carburettor Manual" is a comprehensive guide from Dellorto to the setting up and use of tapered needle motorcycle carburettors. Covers principle of operation of all Dellorto tapered needle carburettors 1970 onwards. 33 pages with colour pictures and diagrams. Also included is the original Dellorto "Tuning Guide 1.1" for carburettors, which gives advice on the choice, setting and use of a Dellorto tapered needle carburettor which includes colour carburettor cross sections showing the multiple stages of carburettor operation. Also contains float height and tapered needle selection tables.

 4 in stock

Chrome finish CEV indicator body and lens supplied complete with wiring and stem. Fits front left or rear right

Fixes to bike using M6 bolt. See LIG30666 for alternative part.

 Sorry, this part is no longer available.

 29751660 GU29751660 29 75 16 60
 2975 1660 2975.1660 29.75.16.60

Chrome finish CEV indicator body and lens supplied complete with wiring and stem. Fits front right or rear left

Fixes to bike using M6 bolt. See LIG30665 for alternative part.

 Sorry, this part is no longer available.

 29751660 GU29751660 29 75 16 60
 2975 1660 2975.1660 29.75.16.60

Brembo rebuild kit for Brembo F05 (P5) calipers with 32mm pistons. Contains 2 bolts, all seals and brake grease

This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).

Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model. Will not fit pistons on Grimeca F05 calipers.

 More than 5 in stock

 39659000 GU39659000 39 65 90 00
 3965 9000 3965.9000 39.65.90.00

Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4