Front Brembo type brake disc, 6 mounting holes. Not drilled. High quality Italian made part

Also known as Guzzi ref. 14613350. Minimum thickness for these cast brake discs is 5.8mm. Always fit new brake pads when replacing a brake disc - see BRA54724. These discs may have oily manufacturing residues on the surface, this should be cleaned off using a cleaning alcohol or brake cleaner before fitting. New pads and discs should be bedded in using normal bedding in procedures. Needs 6 brake disc bolts BRA99499

 This part is due back in stock soon, call 01484 841395 to reserve yours

 28613345 GU28613345 28 61 33 45
 2861 3345 2861.3345 28.61.33.45

Also fits Benelli Sei

Complete drilled fully floating stainless steel EBC Brake Disc for front right hand side

Also known as Guzzi ref 28613660, 30635860. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to front of Nevada, Lario, T5, SP II, Monza 2, V75 and V35 3. Always fit new brake pads when replacing a brake disc. Use disc bolt BRA30460

 This part is available by special order, request a quote

28613670-z 28613670 GU28613670 28 61 36 70
 2861 3670 2861.3670 28.61.36.70

Complete drilled fully floating stainless steel EBC Brake Disc. Used for rear and front left hand brake disc for Le Mans 1000, 1000S. Rear brake disc only on Cali 3, Cali 1100, Spada 3, Strada 1000

Also known as Guzzi ref 28613660, 30635860. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to front of Nevada, Lario, T5, SP II, Monza 2, V75 and V35 3. Always fit new brake pads when replacing a brake disc - BRA54724 . Use disc bolt BRA30460

 This part is available by special order, request a quote

28613670-z 28613670 GU28613670 28 61 36 70
 2861 3670 2861.3670 28.61.36.70

5 hole disc carrier finished in black

We recommend you check your bobbins, spring washers and circlips are OK as these may also require replacement. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to Lario, T5, SP II, Monza 2, V75 and V35 3

 This part is available by special order, request a quote

 28613770 GU28613770 28 61 37 70
 2861 3770 2861.3770 28.61.37.70

Brembo remote brake master cylinder cover kit including screws, cap and rubber

Brembo ref. 110430890

 This part is available by special order, request a quote

 30661100 GU30661100 30 66 11 00
 3066 1100 3066.1100 30.66.11.00

Polished adjustable aluminium brake lever for PS 11, PS 13 and PS 16 master cylinders

Also known as Guzzi ref. 10270652. See HAA10850 for lever pivot pin and BRA01630 for span adjustable alternative lever

 This part is due back in stock soon, call 01484 841395 to reserve yours

30605680-z 30605680 GU30605680 30 60 56 80
 3060 5680 3060.5680 30.60.56.80

Brake bleed screw for Brembo single bleed P2 F08 (P8) calipers.

 This part is available by special order, request a quote

Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease

This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement

 This part is due back in stock soon, call 01484 841395 to reserve yours

 10273920 GU10273920 10 27 39 20
 1027 3920 1027.3920 10.27.39.20

Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota

Black 45 degree rubber cap for brakeline banjo union with master cylinder

Also used for cable exit from clip ons fitted to Le Mans 1 and Le Mans 2. Front brake light switch cover for ELA14959

 This part is due back in stock soon, call 01484 841395 to reserve yours

 39663801 GU39663801 39 66 38 01
 3966 3801 3966.3801 39.66.38.01

Pad pin kit for Brembo P2 F08 (P8) calipers, consists of two long pins, one short and retaining spring.

replaces old Guzzi part ref. 14659100. Brembo ref. 120274210. NB finish on long pins may be zinc or black

 This part is due back in stock soon, call 01484 841395 to reserve yours

 14659100 GU14659100 14 65 91 00
 1465 9100 1465.9100 14.65.91.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)