A4 marine grade stainless steel M8 bleed screw for Brembo P4 front caliper and Tokico calipers used on post 1997 models

Part of Guzzi ref. 31659281, 31659260, 17659260 and 05659230

 4 in stock

 01659230 GU01659230 01 65 92 30
 0165 9230 0165.9230 01.65.92.30

M8 x 75mm A2 stainless steel hex head bolt used as front disc bolt on some small twins and Le Mans 2 and 3. Two of these bolts used as starter motor mounting bolt on big twins fitted with Valeo starter motor

 4 in stock

 98052475 GU98052475 98 05 24 75
 9805 2475 9805.2475 98.05.24.75

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   4 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Brakelight switch for handlebar mounted master cylinder

Stop light switch also known as Guzzi ref. 30530526. Please compare with your existing switch to check compatibility. Can be used as a substitute for ELA27815 or ELA30860. Sometimes supplied with three terminals, in this instance disregard middle terminal. Please note that terminals are smaller than standard switch and will need to be soldered on.

 3 in stock

 30749860 GU30749860 30 74 98 60
 3074 9860 3074.9860 30.74.98.60

Brembo kit containing replacement seal and angled elbow for connecting remote brake fluid reservoir to PS 15, PS 11 and PS 13 rear master cylinders

Also known as Brembo ref. 110312720

 2 in stock

 19659500 GU19659500 19 65 95 00
 1965 9500 1965.9500 19.65.95.00

Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow

This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250

 2 in stock

Also fits Cagiva Elefant E750, Ducati 748

Brembo pad pin kit for P4 30/34C gold calipers, contains a single pin and R clip

Also known as Guzzi ref. 30659102 or Brembo ref. 120320433.

 2 in stock

 20320433 GU20320433 20 32 04 33
 2032 0433 2032.0433 20.32.04.33

Also fits Bimota DB2

Pair of sintered EBC FA095 HH brake pads for Brembo 5165 single pin four piston calipers

With the highest friction rating and a lifetime which is the envy of other Brake Pad Manufacturers, the Double-H pads are now available in a new quieter running, faster bedding formulation. NB if opting for sintered pads use them all round. We advise checking your front caliper(s) have one not two pad pins

 2 in stock

30654602-z 30654602 GU30654602 30 65 46 02
 3065 4602 3065.4602 30.65.46.02

Pair of Ferodo FRP408 brake pads for Brembo 5165 4 piston single pin calipers

We advise checking your front caliper(s) have one not two pad pins.
Ferodo's racing materials have had more wins over the past 50 years than any manufacturer in the world. From the demands of the Isle of Man TT to the circuits of the World Superbike, our organic racing range has provided the performance and modulation required by the world's best riders.
Developed from Ferodo's extensive racing history, unrivalled by any of our competitors Highest friction level available for motorcycle racing Developed by world champions for future world champions Stable friction level achieving excellent modulation Fast bedding-in period Applications to fit all major racing calipers Suitable for stainless steel and cast iron discs

 2 in stock

30654602-z 30654602 GU30654602 30 65 46 02
 3065 4602 3065.4602 30.65.46.02

Protective spring for brake fluid supply line joining rear fluid reservoir to rear brake master cylinder

 2 in stock

 30665860 GU30665860 30 66 58 60
 3066 5860 3066.5860 30.66.58.60