Shop headings: New Spares | Used Spares | Accessories | Brands
Complete Brembo F08 (P8) right hand (when mounted behind fork leg, otherwise use as LH) and rear Brembo brake caliper when mounted in underslung position (under and in front of wheel spindle). Supplied with bleed nipple, dust cover, pins, spring and a pair of brake pads, this is a replacement for the Brembo P8 single and twin bleed caliper
Supplied ready to bolt on and bleed. Also known as Guzzi ref. 18652201, 080137806. Ducati ref. 079937800.
This part is due back in stock soon, call 01484 841395 to reserve yours
17652360 GU17652360 17 65 23 60
1765 2360 1765.2360 17.65.23.60
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT
Complete Brembo F08 (P8) front left hand (when mounted behind fork leg, otherwise use as RH) Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipple, dust cover pins and spring, this is a replacement for the Brembo P8 single and twin bleed caliper. This can also be used as a replacement for the P9 caliper used on the 1000 SP rear
Supplied ready to fit and bleed. Also known as Guzzi ref. 28653301, 28652301. Ducati ref. 079937806
This part is due back in stock soon, call 01484 841395 to reserve yours
18652201 GU18652201 18 65 22 01
1865 2201 1865.2201 18.65.22.01
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT
Brembo M10 bleed nipple kit containing M10 bleed nipple and rubber cap. M10 bleed screw used only on rear of 2003 on models
Brembo no. 98.8249.20
This part is available by special order, request a quote
17659260 GU17659260 17 65 92 60
1765 9260 1765.9260 17.65.92.60
£16.60
INC VAT
£13.83 EX VAT
Brembo Pad Pin Kit for P9 Calipers.
Formerly known as Guzzi part 18659150. Brembo ref. 120274220
This part is due back in stock soon, call 01484 841395 to reserve yours
20274220 GU20274220 20 27 42 20
2027 4220 2027.4220 20.27.42.20
£29.45
INC VAT
£24.54 EX VAT
Front Brembo type brake disc, 6 mounting holes. Not drilled. High quality Italian made part
Also known as Guzzi ref. 14613350. Minimum thickness for these cast brake discs is 5.8mm. Always fit new brake pads when replacing a brake disc - see BRA54724. These discs may have oily manufacturing residues on the surface, this should be cleaned off using a cleaning alcohol or brake cleaner before fitting. New pads and discs should be bedded in using normal bedding in procedures. Needs 6 brake disc bolts BRA99499
This part is due back in stock soon, call 01484 841395 to reserve yours
28613345 GU28613345 28 61 33 45
2861 3345 2861.3345 28.61.33.45
Also fits Benelli Sei
£225.00
INC VAT
£187.50 EX VAT
Brembo PS 16 handlebar mounted front master cylinder. This replaces the PS 15 handlebar mounted master cylinder which was unavailable for many years. The PS16 has a small rectangular fluid reservoir. Use this master cylinder if you are de-linking your brakes to ensure the correct piston operating ratio (if you retain the original PS12 or PS13 your front brakes are likely to feel 'spongy')
Supplied complete with lever and brake lever switch. Uses lever BRA28657 or BRA30605. Also known as Guzzi ref. 28660178. Can be used to replace round PS15 master cylinder BRA07338 and the discontinued PS16 Guzzi ref. 978606
This part is available by special order, request a quote
30660125 GU30660125 30 66 01 25
3066 0125 3066.0125 30.66.01.25
£225.00
INC VAT
£187.50 EX VAT
Ferodo FDB204P brake pads for Brembo P9 calipers only, fitted to rear applications
Not for Brembo P08/F08 calipers. Some German Tonti framed models also use these as rear pads. Also used on Benelli Sei rear
Ferodo's racing materials have had more wins over the past 50 years than any manufacturer in the world. From the demands of the Isle of Man TT to the circuits of the World Superbike, our organic racing range has provided the performance and modulation required by the world's best riders.
This part is due back in stock soon, call 01484 841395 to reserve yours
18654660-z 18654660 GU18654660 18 65 46 60
1865 4660 1865.4660 18.65.46.60
Also fits Benelli 900 Sei Rear (1983), Laverda 1000 RGS Fronts (1984)
£19.70
INC VAT
£16.42 EX VAT
Black 45 degree rubber cap for brakeline banjo union with master cylinder
Also used for cable exit from clip ons fitted to Le Mans 1 and Le Mans 2. Front brake light switch cover for ELA14959
This part is due back in stock soon, call 01484 841395 to reserve yours
39663801 GU39663801 39 66 38 01
3966 3801 3966.3801 39.66.38.01
£4.20
INC VAT
£3.50 EX VAT
70mm spring used as retaining spring for airbox and rear master cylinder return spring. Application varies by model
Two required for airbox. Some models use 50mm spring BRA17651 for master cylinder - we recommend measuring yours before ordering
This part is due back in stock soon, call 01484 841395 to reserve yours
17667650 GU17667650 17 66 76 50
1766 7650 1766.7650 17.66.76.50
£4.40
INC VAT
£3.67 EX VAT
Brake Hose Support Rubber
Wraps around hose and slots into bracket
Sorry, this part is no longer available.
17658260 GU17658260 17 65 82 60
1765 8260 1765.8260 17.65.82.60
Sorry this item is out of production