Shop headings: New Spares | Used Spares | Accessories | Brands
Rear crash bar set, bright chrome finish
This part is available by special order, request a quote
29458251-Z
£134.40
INC VAT
£112.00 EX VAT
Flywheel for models with Digiplex ignition
Weighs 4.3kg
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
29067040 GU29067040 29 06 70 40
2906 7040 2906.7040 29.06.70.40
Prices from
£90.00 - £130.00
inc VAT dependent on condition
Pair of Wirth progressive fork springs
These progressive fork springs improve ride quality and handling by responding progressively to the road. The more the spring is compressed the harder it becomes preventing the forks from bottoming out. See OIA01001 for fork oil
This part is available by special order, request a quote
£130.00
INC VAT
£108.33 EX VAT
Deep sump spacer made from alloy. This increases the volume of air in the crankcase and helps reduce 'heavy breathing'. The oil is also better cooled when using one of these. Finished externally in silver paint
To fit this sump spacer you will need longer sump bolts (14 x SSA06055 + 4 x SSA06090) and a pair of sump gaskets (ENA14036). You will also need a longer dipstick, see ENA28005
Availability varies on this part, check availability
14003240 GU14003240 14 00 32 40
1400 3240 1400.3240 14.00.32.40
£128.00
INC VAT
£106.67 EX VAT
Brembo P08 / F08 ( P8 ) right hand (if mounted behind fork leg) single bleed (M10 bleed nipple) brake caliper. Also used as rear caliper if mounted in underslung position
Coated aluminium pistons
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
14 in stock, request a quote
28652201 GU28652201 28 65 22 01
2865 2201 2865.2201 28.65.22.01
Prices from
£30.00 - £125.00
inc VAT dependent on condition
Brembo P08 / F08 ( P8 ) left hand (if mounted behind fork leg) or rear (mounted above and behind wheel spindle) single bleed (M10 bleed nipple) brake caliper
Coated aluminium pistons
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
3 in stock, request a quote
28653001 GU28653001 28 65 30 01
2865 3001 2865.3001 28.65.30.01
Prices from
£60.00 - £125.00
inc VAT dependent on condition
Output flange for drive box, engages with the driveplate on the wheel
Also known as Guzzi ref. 17351401. 8 hole M8 fixing in flange
This part is available by special order, request a quote
17351400 GU17351400 17 35 14 00
1735 1400 1735.1400 17.35.14.00
£125.00
INC VAT
£104.17 EX VAT
Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.
This part is due back in stock soon, call 01484 841395 to reserve yours
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£125.00
INC VAT
£104.17 EX VAT
Set of 3 piston rings for Nikasil 92mm bore
Only for Cali 1100 frame prefixes KC and KD, for KG and KH prefixes see ENA18601
This part is available by special order, request a quote
30060660-z 30060660 GU30060660 30 06 06 60
3006 0660 3006.0660 30.06.06.60
£123.50
INC VAT
£102.92 EX VAT
Long swing arm with brace and hole for threaded caliper plate pin
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
5 in stock, request a quote
30540260 GU30540260 30 54 02 60
3054 0260 3054.0260 30.54.02.60
Prices from
£60.00 - £120.00
inc VAT dependent on condition