Shop headings: New Spares | Used Spares | Accessories | Brands
83 Results - Page 1 of 9
Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs. For 16" wheel models
Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Replaces Guzzi ref. 2952360 and 29526460. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)
This part is available by special order, request a quote
£295.00
INC VAT
£245.83 EX VAT
Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs
Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)
This part is available by special order, request a quote
28526490 GU28526490 28 52 64 90
2852 6490 2852.6490 28.52.64.90
£295.00
INC VAT
£245.83 EX VAT
Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs
Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Replaces Guzzi ref. 2952360 and 29526460. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)
This part is available by special order, request a quote
29525360 GU29525360 29 52 53 60
2952 5360 2952.5360 29.52.53.60
£295.00
INC VAT
£245.83 EX VAT
Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs SUA14601
Stainless steel damper rod and alloy top nut, supplied with fork top O ring. These are made for the thinner wall stanchions used on the Le Mans 1. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)
This part is available by special order, request a quote
1452640*
£245.00
INC VAT
£204.17 EX VAT
Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs SUA18961
Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)
This part is due back in stock soon, call 01484 841395 to reserve yours
14526455-z 14526455 GU14526455 14 52 64 55
1452 6455 1452.6455 14.52.64.55
Also fits Benelli Sei 900
£245.00
INC VAT
£204.17 EX VAT
Dimensions:
For 35mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp
Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube
These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.
This part is available by special order, request a quote
£240.00
INC VAT
£200.00 EX VAT
Complete Brembo F08 (P8) right hand (when mounted behind fork leg, otherwise use as LH) and rear Brembo brake caliper when mounted in underslung position (under and in front of wheel spindle). Supplied with bleed nipple, dust cover, pins, spring and a pair of brake pads, this is a replacement for the Brembo P8 single and twin bleed caliper
Supplied ready to bolt on and bleed. Also known as Guzzi ref. 18652201, 080137806. Ducati ref. 079937800.
This part is due back in stock soon, call 01484 841395 to reserve yours
17652360 GU17652360 17 65 23 60
1765 2360 1765.2360 17.65.23.60
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT
Complete Brembo F08 (P8) front left hand (when mounted behind fork leg, otherwise use as RH) Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipple, dust cover pins and spring, this is a replacement for the Brembo P8 single and twin bleed caliper. This can also be used as a replacement for the P9 caliper used on the 1000 SP rear
Supplied ready to fit and bleed. Also known as Guzzi ref. 28653301, 28652301. Ducati ref. 079937806
This part is due back in stock soon, call 01484 841395 to reserve yours
18652201 GU18652201 18 65 22 01
1865 2201 1865.2201 18.65.22.01
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT
Chromed fork stanchion
Not suitable for earlier Le Mans 1000. Le Mans 1000 series 1 stanchions are 31mm longer than these.
This part is available by special order, request a quote
29525450 GU29525450 29 52 54 50
2952 5450 2952.5450 29.52.54.50
£202.00
INC VAT
£168.33 EX VAT
Complete right hand fork leg assembly consisting of chrome stanchion, slider, spring and damper
Caliper behind fork leg, includes mudguard stay mounts
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
3 in stock, request a quote
185226601
Prices from
£75.00 - £150.00
inc VAT dependent on condition