Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs

Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)

 This part is available by special order, request a quote

 28526490 GU28526490 28 52 64 90
 2852 6490 2852.6490 28.52.64.90

Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs

Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Replaces Guzzi ref. 2952360 and 29526460. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)

 This part is available by special order, request a quote

 29525360 GU29525360 29 52 53 60
 2952 5360 2952.5360 29.52.53.60

Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube

These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.

 This part is available by special order, request a quote

Circlip, various applications. Used for retaining fork springs on Tonti models

Fork damper rod circlip

 More than 5 in stock

 90271014 GU90271014 90 27 10 14
 9027 1014 9027.1014 90.27.10.14

Rear brake pedal operating rod, connects to lever on master cylinder. Supplied without clevis fork or adjuster nut

Brake rod

 This part is available by special order, request a quote

Brembo P08 / F08 ( P8 ) right hand (if mounted behind fork leg) single bleed (M10 bleed nipple) brake caliper. Also used as rear caliper if mounted in underslung position

Coated aluminium pistons

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 14 in stock, request a quote

 28652201 GU28652201 28 65 22 01
 2865 2201 2865.2201 28.65.22.01

Brembo right hand (if mounted in front of fork leg) and rear P08 / F08 ( P8 ) twin bleed (M6 bleed nipples) brake caliper

Also used on period Laverda and Ducati models. Rare and not available new

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 Sorry, this part is no longer available.

 14653001 GU14653001 14 65 30 01
 1465 3001 1465.3001 14.65.30.01

Brembo left hand (if mounted in front of fork leg) P08 / F08 ( P8 ) twin bleed (M6 bleed nipples) brake caliper

Also used on period Laverda and Ducati models

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 2 in stock, request a quote

 14652200 GU14652200 14 65 22 00
 1465 2200 1465.2200 14.65.22.00

Brembo P08 / F08 ( P8 ) left hand (if mounted behind fork leg) or rear (mounted above and behind wheel spindle) single bleed (M10 bleed nipple) brake caliper

Coated aluminium pistons

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 1 in stock, request a quote

 28653001 GU28653001 28 65 30 01
 2865 3001 2865.3001 28.65.30.01

1 litre of Millers ATF, used for fork lubrication and as hydraulic fluid for auto drive on Convert

1.7l required for Convert torque converter circuit (oil change due every 18000 miles). 80ml required per side for fork lubrication on big twins equipped with cartridge fork dampers (e.g. Le Mans 2, T3, 1000 SP etc...), 70ml for required per side for fork lubrication on small twins and Cali 1100 equipped with cartridge fork dampers (e.g. V50 II, V35 etc...)
OIA02075 can be used as a substitute for ATF in fork rebuilds.
Please note this part CANNOT be posted outside of the UK mainland area

 More than 5 in stock