Full throttle cable

1 cable per carb. 1 ball end, 1 thin bullet shaped end. We advise you to measure your existing cable before ordering in case you have a non standard set up.

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 14117500 GU14117500 14 11 75 00
 1411 7500 1411.7500 14.11.75.00

Dimensions:
1080mm outer length, 85mm free length, 5.6mm ball end, 2.7mm ball end

Throttle cable for models with standard high top PHF pumper carbs

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 14117555 GU14117555 14 11 75 55
 1411 7555 1411.7555 14.11.75.55

Dimensions:
897mm outer length, 105mm free length, 5.7mm barrel nipple, 5.7mm barrel nipple

Throttle cable for models with standard high top PHF pumper carbs

We advise you to measure your existing cable before ordering in case you have a non standard set up. Use these cables if fitting a Tommaselli 2C twin pull throttle with high top PHF 36 carbs

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

14117550-z 14117550 GU14117550 14 11 75 50
 1411 7550 1411.7550 14.11.75.50

Dimensions:
895mm outer, 1040mm inner length including angled section, 80mm free length

Throttle cable, also suitable where PHF30 carbs are fitted to T3 and T4 models

only suitable for models with PHF 30 carbs. We advise you to measure your existing cable before ordering in case you have a non standard set up. Two cables required

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 17117562 GU17117562 17 11 75 62
 1711 7562 1711.7562 17.11.75.62

Dimensions:
1010mm outer length, 120mm free length

Thottle cable, runs from twistgrip to carb

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 19117580 GU19117580 19 11 75 80
 1911 7580 1911.7580 19.11.75.80

Dimensions:
1020mm outer length, 96mm free length, 5.7mm barrel nipple, 2.7mm barrel nipple

Throttle cable

We advise you to measure your existing cable before ordering in case you have a non standard set up. Two cables required per bike

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

29117500-z 29117500 GU29117500 29 11 75 00
 2911 7500 2911.7500 29.11.75.00

Dimensions:
1250mm outer length, 95mm free length, 5.7mm barrel nipple, 2.7mm barrel nipple

Throttle cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 30117525 GU30117525 30 11 75 25
 3011 7525 3011.7525 30.11.75.25

Dimensions:
1000mm outer length, 170mm free length, 5.7mm barrel nipple, 5.7mm barrel nipple

Closing throttle cable for models affected by the 2002 factory recall, for details see CaliEVThrottleCableRecall.pdf

Affected models are: California EV: frame numbers from KD100548 to KD115984, California Special: frame numbers from KD130001 to KD131984, California Jackal: frame numbers from KD150001 to KD153177.We advise you to measure your existing cable before ordering in case you have a non standard set up.

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 03117830 GU03117830 03 11 78 30
 0311 7830 0311.7830 03.11.78.30

Dimensions:
1140mm outer length, 108mm free length

Throttle cable

Replaces Guzzi ref. 01117530, 01117500. Only one cable is required. We advise you to measure your existing cable before ordering in case you have a non standard set up

 Availability varies on this part, call us to check availability

If you would like to be emailed once this item is available again then click here

 01117590 GU01117590 01 11 75 90
 0111 7590 0111.7590 01.11.75.90

Dimensions:
848mm outer length, 223mm free length, 5.6mm barrel nipple, 5.6mm barrel nipple

M5 threaded clip for retaining bodywork

Superceded by FRA81375

 01576532 GU01576532 01 57 65 32
 0157 6532 0157.6532 01.57.65.32

Dimensions:
20mm x 14mm M5 thread