1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

 More than 5 in stock

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock

1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527

1 litre of Agip SAE 7.5W fork oil. Eni Fork Oil 7.5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required.

Eni Fork Oil 5W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 5W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 5W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.

See BRA99013 for high performance alternative.

If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area

 More than 5 in stock

One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

 More than 5 in stock

5 Litres of ENI Professional i-Base SAE20W-50 mineral oil. We recommend this classic engine oil for older (pre 1998) 2 valve big twins, it is similar to Castrol GTX 20/50 (which is no longer available). I-Base has an extremely high viscosity index which keeps it free flowing when cold whilst maintaining viscosity when hot. It is specially formulated for older engines. This oil was previously known as AGIP Classic.

Eni I-Base professional L 20W-50 has a strong resistance to the deterioration of its characteristics and in particular to the thermo-oxidative phenomena resulting from prolonged exposure in high temperature conditions and in the presence of air and other agents. The anti-wear characteristics of this product ensure a long service life of the moving parts, reducing engine maintenance and overhaul.Rated API SL/CF.
Quantities required:

• 850/1000 ALL Models, Cali 1100, Quotas - engine: 3l
• V35, V50, V65, V75 - engine: 2l

 This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Triumph Bonneville T100

500ml AGIP brake and clutch fluid, this is a high performance DOT 5.1 fluid which has a higher boiling point than DOT 4 so suitable for race bikes or machines ridden in hot temperatures. Can be mixed safely with DOT 3 or DOT 4 but may need changing more often due to it being more hygroscopic

Please note this part CANNOT be posted outside of the UK mainland area

 This part is available by special order, request a quote

1 litre of ENI I-Ride Moto 10W-40. Eni i-Ride Moto 10W-40 is a semi-synthetic lubricant formulated with high quality bases designed for 4-stroke engines of the latest generation.

Eni i-Ride moto 10W-40 is a superior quality product specifically designed to meet the highest performance levels.

The semi synthetic additivation of Eni i-Ride moto 10W-40 is able to ensure perfect lubrication of the engine in any driving condition.

The perfect balance between the additives used in the formulation ensures maximum protection and engine life, optimizing clutch and gear performance.

Surpasses API SL, JASO MA and MA2. ENI oils were previously sold under the AGIP name

 1 in stock

1 litre of Eni I-Ride Moto 15W-50 mineral oil. Eni i-Ride moto 15W-50 is a lubricant formulated with high quality bases designed for 4-stroke engines of the latest generation.

Eni i-Ride moto 15W-50 is a superior quality product specifically designed to meet the highest performance levels.

The special additivation of Eni i-Ride moto 15W-50 is able to ensure perfect lubrication of the engine in any driving condition.

The perfect balance between the additives used in the formulation ensures maximum protection and engine life, optimizing clutch and gear performance.

Surpasses API SL, JASO MA and MA2. ENI oils were previously sold under the AGIP name

 More than 5 in stock