Pair of high performance Dyna 12 volt 5 ohm dual lead ignition coils with angled HT lead socket. These are a performance coil which offer improved starting and performance for twin plugged models

Dyna Performance Replacment twin plug coils are high tech, top quality coils, designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dynatek coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils. Dynatek coils work with factory electronic ignitions, points, and aftermarket ignitions. These are a different size and shape from the original coils so you will need to fabricate a suitable coil mount. Guzziology recommends using electronic ignition with these coils as points may not be up to triggering these coils. See ELA00001 for crimp on HT lead connector.
Individual coils available by special order, call us for details

 This part is available by special order, request a quote

1471650

Stylish sump protector to protect your engine from damage. This beautifully made part is manufactured from stainless steel plate for maximum protection and longevity. Drilled to save weight this is an essential accessory if you take your Stelvio off road

 Sorry, this part is no longer available.

Classic Le Mans 1 fairing cowling kit consisting of tinted screen with edging, black screen fasteners, quality replica cowling (pre drilled and manufactured exclusively for Gutsibits) in raw finish, side and lower fairing brackets.

We can also supply a headlamp ( LIA37593 or LIA37595 ), headlamp brackets, indicators and stems and most other parts you might need to turn your bike into Le Mans 1 lookalike, call or email for details.
To mount this fairing you can use 5 x FRA06016 + 5 x FRA29577 + 2 x FRA93060 - these are not included with the kit

 This part is due back in stock soon, call 01484 841395 to reserve yours

Special rack for mounting a H & B top box to the V85 TT. Complete with hinged case stop, this Alu-Rack allows you to fit Xplorer and Junior top boxes to your bike using the standard quick release top case fitting

 This part is available by special order, request a quote

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

• Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
• 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
• Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
• Polished aluminium instrument backs (attach with existing nuts)

Manufactured from 6mm aluminium, this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated.
Note that on models with an electronic tacho (e.g. Cali 3) the stud hole spacing may be a few mm out and you will needto drill new stud holes in the rear of the surround. You may also need to very slightly enlarge the warning light holes

 2 in stock

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

• Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
• 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
• Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
• Polished aluminium instrument backs (attach with existing nuts)

Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres

Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit

 1 in stock

Set of minimal black C-Bow pannier carriers. Unobtrusive on the bike they allow the easy mounting and quick release of Hepco C-Bow panniers (e.g. LUA62230 ).

The C-Bow bag holder is made to take a variety of Hepco & Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust silencers. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check manual for more info.

recommended load: 5kg per bag (please check manual or motorcycle manufacturer for more info) can mostly be combined to topcasecarrier, sissybars or other rear carrier (please check manual or bike specific info) rear rack enlargements can possibly restrict the function of the bags

 This part is available by special order, request a quote

Genuine Guzzi centrestand, invaluable for maintenance and safe parking

 This part is available by special order, request a quote

2S001998

Genuine Guzzi centrestand, invaluable for maintenance and safe parking

 This part is available by special order, request a quote

Set of minimal black C-Bow pannier carriers. Unobtrusive on the bike they allow the easy mounting and quick release of Hepco C-Bow panniers (e.g. LUA62230 ).

The C-Bow bag holder is made to take a variety of Hepco & Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust silencers. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check manual for more info.

recommended load: 5kg per bag (please check manual or motorcycle manufacturer for more info) can mostly be combined to topcasecarrier, sissybars or other rear carrier (please check manual or bike specific info) rear rack enlargements can possibly restrict the function of the bags

 This part is available by special order, request a quote