Shop headings: New Spares | Used Spares | Accessories | Brands
M16 stainless steel half nut and washers for front wheel spindle. Includes flat and wavy washer
NB this is a half nut. Can also be used as alternator retaining nut 92603516
More than 5 in stock
92602516-z 92602516 GU92602516 92 60 25 16
9260 2516 9260.2516 92.60.25.16
£8.50
INC VAT
£7.08 EX VAT
Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers
Supplied with 4 crush washers. Also known as Guzzi ref. 95990033
2 in stock
95990028-z 95990028 GU95990028 95 99 00 28
9599 0028 9599.0028 95.99.00.28
Also fits Laverda Jota
£8.40
INC VAT
£7.00 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats
Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models
Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.
5 in stock
£8.20
INC VAT
£6.83 EX VAT
A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
More than 5 in stock
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£8.00
INC VAT
£6.67 EX VAT
Titanium rocker feed and breather M8 banjo bolt
Made specially for Gutsibits in corrosion resistant grade 5 titanium. Use with SIA12200 crush washer
More than 5 in stock
95990037 GU95990037 95 99 00 37
9599 0037 9599.0037 95.99.00.37
£8.00
INC VAT
£6.67 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 3mm OD at base, 18mm from tip to underside of flats
Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.
Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap
More than 5 in stock
£7.80
INC VAT
£6.50 EX VAT
Titanium shouldered retaining screw for rocker cover. 4 required for each cylinder head
Rocker cover bolt for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.
More than 5 in stock
887483 MG887483
£7.50
INC VAT
£6.25 EX VAT
Stainless steel M10 double banjo bolt for aluminium coloured brake manifolds only, used with front yoke mounted splitter on some small twins
Supplied with 3 crush washers
This part is available by special order, request a quote
95990034 GU95990034 95 99 00 34
9599 0034 9599.0034 95.99.00.34
£7.20
INC VAT
£6.00 EX VAT
M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits in corrosion resistant grade 5 titanium as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
Availability varies on this part, check availability
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£7.00
INC VAT
£5.83 EX VAT
Brilliant chrome, aluminium and metal polish.
Make your Guzzi gleam.
1 in stock
£6.50
INC VAT
£5.42 EX VAT