Lightweight folding Tarozzi aluminium pillion footrest on zinc finish steel bracket footpeg. Footpeg is hollow with rubber Sleeve. Supplied with nyloc nut and washer.

A great way to tidy up the pillion footrests on your project bike

 Availability varies on this part, check availability

 01163620 GU01163620 01 16 36 20
 0116 3620 0116.3620 01.16.36.20

Complete single disc clutch kit for 5 speed big twins containing flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. Suitable for all big twins with either distributor or crankshaft mounted ignition system, not suitable for Digiplex equipped models.

This clutch upgrade has the following advanges over the old two plate clutch:

• Reduction in flywheel and clutch weight of approx. 1KG
• Improved acceleration
• Smoother gear changes at high RPM
• Quicker engine decelleration
• Reduction in engine vibration as the clutch assembly is (this is not possible with the original clutch)
• Lighter handlebar clutch lever action
• More precise clutch engagement and disengagement.
• More progressive clutch engagement.
• Increased ability to handle higher torque and horsepower.
• Lower clutch disk wear (reduced maintenance)
• Fewer parts (no intermediate plate, no second friction plate) to wear out
• Ease of assembly - gearbox can be fitted to engine without centering of the clutch disk.

 This part is due back in stock soon, call 01484 841395 to reserve yours

Replacement clutch plate for single plate RAM clutches

Torque setting for fitting this is 25Nm with a thread locking compound

 This part is available by special order, request a quote

Pair of black tubular rocker cover protector bars for round and square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped

These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet. These bars are supplied with a plastic grommet for each end, this will need chamfering or leaving off on round head models with bolt on rocker cover breather pipes, e.g. T3. These bars will not fit on a T3 or other model with knee pads

 This part is due back in stock soon, call 01484 841395 to reserve yours

Pair of chrome tubular rocker cover protector bars for round and square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped

These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet. These bars are supplied with a plastic grommet for each end, this will need chamfering or leaving off on round head models with bolt on rocker cover breather pipes, e.g. T3. These bars will not fit on a T3 or other model with knee pads

 This part is due back in stock soon, call 01484 841395 to reserve yours

Pair of chrome tubular rocker cover protector bars for square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped

These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet.

 This part is available by special order, request a quote

Pair of polished billet aluminium head protectors, these protect the top end of your engine in the unfortunate event of the bike being dropped.

For square barrel 850, 1000 and 1100 models. You may need longer rocker cover bolts due to the thickness of these protectors, see SSA06035 (you'll need 8). Don't confuse these thick, high quality billet items with cheaper imitations.

 3 in stock

Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models with billet rocker cover protectors fitted as these models need 8 of the bolts to be longer

 More than 5 in stock

Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted, for models with rocker cover protectors see SSA80015. This kit will suit a V11 with standard rocker cover protectors which are much thinner than aftermarket types.

See SSA81522 for rocker cover trim retaining screws on 2v/cyl CARC models, these are not included with this kit.

 More than 5 in stock

Pair of stylish Kappa soft panniers, perfect for V7 and V9 models.

• 550D Polyester construction with PVC coating
• 2mm thick synthetic leather (PU) detailing
• 190D Nylon inner lining material
• 14 litre capacity for each bag
• Product complies with Reach regulations
• Roll-top closure system
• Saddlebag straps with hook and loop fastening closure
• Front handle
• Waterproof removable inner lining with thermo-sealed seams
• Strap with ring loop to fasten to double D-ring
• Front waterproof zip
• KAPPA RAMBLER logo printed on patch
• Bags come with a TNT bag with the KAPPA RAMBLER logo for storage

 Order now and we will post your order within 7 days.