**SALE** Save £50 on these fork dampers!

Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs

Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)

 1 in stock

 28526440 GU28526440 28 52 64 40
 2852 6440 2852.6440 28.52.64.40

1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock

1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

 More than 5 in stock

1 litre of Millers ATF, used for fork lubrication and as hydraulic fluid for auto drive on Convert

1.7l required for Convert torque converter circuit (oil change due every 18000 miles). 80ml required per side for fork lubrication on big twins equipped with cartridge fork dampers (e.g. Le Mans 2, T3, 1000 SP etc...), 70ml for required per side for fork lubrication on small twins and Cali 1100 equipped with cartridge fork dampers (e.g. V50 II, V35 etc...)
OIA02075 can be used as a substitute for ATF in fork rebuilds.
Please note this part CANNOT be posted outside of the UK mainland area

 More than 5 in stock

Taper needle roller bearing used as steering head bearing

2 sets required per bike. Also used as rear drive box pinion bearing on big twins with rear drum brake

 More than 5 in stock

 92249225 GU92249225 92 24 92 25
 9224 9225 9224.9225 92.24.92.25

Circlip, various applications. Used for retaining fork springs on Tonti models

Fork damper rod circlip

 More than 5 in stock

 90271014 GU90271014 90 27 10 14
 9027 1014 9027.1014 90.27.10.14

Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs SUA18961

Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)

 This part is due back in stock soon, call 01484 841395 to reserve yours

14526455-z 14526455 GU14526455 14 52 64 55
 1452 6455 1452.6455 14.52.64.55

Also fits Benelli Sei 900

Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs

Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)

 This part is available by special order, request a quote

28526400-z 28526400 GU28526400 28 52 64 00
 2852 6400 2852.6400 28.52.64.00

Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs

Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Replaces Guzzi ref. 2952360 and 29526460. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)

 This part is available by special order, request a quote

 29525360 GU29525360 29 52 53 60
 2952 5360 2952.5360 29.52.53.60