Titanium M8 exhaust stud. The factory studs on these models are prone to corrosion so we recommend replacing now with these corrosion free titanium parts.

See Ti stud kit SSA85048 for replacement stud kit. Also known as Guzzi ref. 827018, AP8560061, B017636

 5 in stock

1A003632R

Also fits Aprila Caponord, Aprilia 400 Atlantic Sprint, Aprilia 400 Scarabeo Light , Aprilia 500 Atlantic, Aprilia 500 Scarabeo Light , Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 900 Dorsoduro, Aprilia 900 Shiver, Aprilia 900 Shiver ABS, Aprilia 900 SMV Dorsoduro

Titanium shouldered retaining screw for rocker cover. 4 required for each big twin cylinder head, 3 per head on small twins. Upgrade your corrosion prone zinc OE parts with a polished upgrade.

Rocker cover bolt. We recommend that you check length of bolts on your engine before ordering as two lengths of bolt were used. Supercedes Guzzi ref. 976591
See ENA83249 for rubber sealing washer on CARC models and ENA06716 for sealing washer on other models

 More than 5 in stock

 842291 MG842291

Handy 70g tube of copper grease anti-seize paste

Use to prevent threaded studs, nuts and bolts form seizing

Please note this part CANNOT be posted outside of the UK mainland area

 1 in stock

Brilliant chrome, aluminium and metal polish.

Make your Guzzi gleam.

 1 in stock

A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787

See BRA36794 for rubber cap

 More than 5 in stock

Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,

Titanium rocker feed and breather M8 banjo bolt

Made specially for Gutsibits in corrosion resistant grade 5 titanium. Use with SIA12200 crush washer

 More than 5 in stock

 95990037 GU95990037 95 99 00 37
 9599 0037 9599.0037 95.99.00.37

Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers

Supplied with 4 crush washers. Also known as Guzzi ref. 95990033

 2 in stock

95990028-z 95990028 GU95990028 95 99 00 28
 9599 0028 9599.0028 95.99.00.28

Also fits Laverda Jota

Sump bolt kit containing all replacement stainless steel socket cap bolts

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)

 More than 5 in stock

Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted, for models with rocker cover protectors see SSA80015. This kit will suit a V11 with standard rocker cover protectors which are much thinner than aftermarket types.

See SSA81522 for rocker cover trim retaining screws on 2v/cyl CARC models, these are not included with this kit.

 More than 5 in stock

Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070).
See SSA81522 for rocker cover trim retaining screws, these are not included with this kit.

 More than 5 in stock