Shop headings: New Spares | Used Spares | Accessories | Brands
5 hole disc carrier finished in black
We recommend you check your bobbins, spring washers and circlips are OK as these may also require replacement. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to Lario, T5, SP II, Monza 2, V75 and V35 3
This part is available by special order, request a quote
28613770 GU28613770 28 61 37 70
2861 3770 2861.3770 28.61.37.70
£33.10
INC VAT
£27.58 EX VAT
Brake pipe. Used to link rear master cylinder to splitter. Also used as pipe from front master cylinder on some models.
Original type rubber brakeline with chunky galvanized ends
This part is available by special order, request a quote
17658550 GU17658550 17 65 85 50
1765 8550 1765.8550 17.65.85.50
£33.60
INC VAT
£28.00 EX VAT
Brake lever bracket and adjuster assembly incl. threaded hole for mirror for models with a cable operated hydraulic front brake
Sorry, this part is no longer available.
19605400-666
Sorry this item is out of production
Rebuild kit for Brembo Goldline Calipers with 34mm / 30mm pistons. Contains seals, brake grease and instructions in English. One kit required per caliper. Also suitable for some Ducati / Aprilia models.
Caliper seal kit
2 in stock
£34.00
INC VAT
£28.33 EX VAT
Brake pipe used for supplying front left hand caliper, screws directly into caliper
Original type rubber brakeline with chunky galvanized ends
This part is available by special order, request a quote
17658860-z 17658860 GU17658860 17 65 88 60
1765 8860 1765.8860 17.65.88.60
£34.00
INC VAT
£28.33 EX VAT
Polished aluminium handlebar brake lever for Brembo master cylinder
Supercedes Guzzi ref. 856048
This part is available by special order, request a quote
896346 MG896346
£34.44
INC VAT
£28.70 EX VAT
Front right hand brake pipe linking yoke mounted splitter to handlebar master cylinder
Original type rubber brakeline with chunky galvanized ends
This part is available by special order, request a quote
14657500-z 14657500 GU14657500 14 65 75 00
1465 7500 1465.7500 14.65.75.00
£34.70
INC VAT
£28.92 EX VAT
Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons
A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752
More than 5 in stock
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£35.00
INC VAT
£29.17 EX VAT
Polished replica adjustable aluminium brake lever for PS 16 and PS 22 handlebar master cylinders. Can also be fitted as an adjustable update to Breva 750, Nevada 750 (2004 on) , V7 Classic , V7 Cafe etc... Note that this lever blade is approximately 20mm shorter than the OE lever.
Also known as Guzzi ref. 981050 and 854603. BRA03645 can be used as a non adjustable substitute
1 in stock
AP8133510
Also fits Aprilia Caponord, Aprilia Pegaso 650 (CHASSIS NUMBER PREFIX: ZD4VD0,ZD4VDA,ZD4VDB,ZD4VDD,ZD4VDE 2005-2009), Aprilia Futura 1000 (2001-2003)
£35.30
INC VAT
£29.42 EX VAT
Bright aluminium finish brake lever, 4 position span adjustment
See HAA10850 for lever pivot pin
1 in stock
01605630-z 01605630 GU01605630 01 60 56 30
0160 5630 0160.5630 01.60.56.30
Also fits Aprilia RS250
£36.00
INC VAT
£30.00 EX VAT