Page 3 of 14
Sort by Title    | Sort by Price |
Fits Moto Guzzi T3, T4  | Big Bore Piston and Barrel Kit Low Comp 88mm Gilardoni Upgrade Fits 850 Crankcase
ENA18103 | £309.70 INC VAT£258.08 EX VAT |  | Complete 950cc piston and Nikasil coated barrel kit including gudgeon pin, piston rings and circlips. Piston is low compression. This is a 950cc upgrade for 850cc models Components for one cylinder. The barrel is designed to fit the standard crankcase aperture on 850cc bikes so it is not necessary to modify the crankcase |  | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: 88mm bore 18060102-z 18060102 GU18060102 18 06 01 02
1806 0102 1806.0102 18.06.01.02 | | |
|
Fits Moto Guzzi V35, V50, V65, T3, T4, Convert, G5, Convert, Mille GT
Black Headlamp Complete
LIA37594 | £88.00 INC VAT£73.33 EX VAT |  | Complete shallow bowl 190mm matt black headlight unit. Includes a pilot / parking light E-marked for road use.
Supplied complete with H4 bulb, pilot light and four short wires (without connectors). NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems | | quantityadd to basket
| Dimensions: 190mm diameter, M8 threaded mounting holes, approx 190mm between mounting holes. 13.5cm front to back, 7cm from mounting holes to rear of bowl 2 in stock | | |
|
Universal Part: Cafe Racer Seat Unit
CFA00051 | £104.80 INC VAT£87.33 EX VAT | 
 | Classically styled humped race seat unit with built in number plate hanger and recess for tail light ideal for your home built cafe racer. Supplied unpainted and undrilled. This seat pan is designed for early Tonti frames but may fit other models with appropriate modifications Mounting brackets and seat cushion not included | | quantityadd to basket
| Dimensions: 225mm width, 640mm long (excluding plate hanger), 650mm hump 1 in stock | | |
|
Universal Part: Cafe Racer Seat Unit
CFA00050 | £104.80 INC VAT£87.33 EX VAT |  | Classically styled humped race seat unit ideal for your home built cafe racer. Supplied unpainted and undrilled. This seat pan is designed for early Tonti frames but may fit other models with appropriate modifications Mounting brackets and seat cushion not included | | quantityadd to basket
| Dimensions: 220mm width, 685mm long, 245mm wide x 130mm hump 1 in stock | | |
|
Fits Moto Guzzi V35, V50, S3, T3, T4, 1000 SP, G5, Convert, Mille GT
Chrome Headlamp Complete
LIA99901 | £71.70 INC VAT£59.75 EX VAT | 
 | Complete round 175mm chrome left hand dip (UK spec) headlight unit with bulb Due to the scarcity of LH dip Italian made headlights we have sourced this reasonably priced alternative which is similar in size to the headlamp used on V50 and T3 models. Supplied complete with H4 bulb. NB Headlamp is narrower at mounting point than original headlamp so a 10mm spacer may be required each side if original headlamp brackets are used, the M10 thread is finer than the thread used on T3 indicator stems. No pilot light. | | quantityadd to basket
| Dimensions: 175mm diameter, M10 x 1.25 threaded mounting holes 1 in stock | | |
|
Fits Moto Guzzi V35, V50, V65, Le Mans 1, T3, T4, Convert, G5, Convert, Mille GT
Chrome Headlamp Complete
LIA37593 | £88.00 INC VAT£73.33 EX VAT | 
 | Complete shallow bowl 190mm chrome headlight unit. Includes a pilot / parking light. A shallow bowl makes it especially suitable for mounting on Moto Guzzis underneath the instruments Homologated for road use.
Supplied complete with H4 bulb, pilot light and four short wires (without connectors). This headlight will fit fairing cowling FAA99575 for Le Mans 1 conversions if trim strip is not fitted to inside edge of fairing. NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems | | Availability on this part varies. If you would like to be emailed once this item is available again then email us or call us on 01484 841395
| Dimensions: 195mm diameter, M8 threaded mounting holes, approx 195mm between mounting holes. 13.5cm front to back, 7cm from mounting holes to rear of bowl | | |
|
Fits Moto Guzzi 850/1000 ALL Models, Cali EV, Cali Stone, Cali Jackal, Cali Vintage, Cali Aquila Nera, V65 Florida, 750S, 750 S3, Breva 750, Nevada ALL
Chrome Reverse Cone Silencers Universal Fitment
EXA55628 | £148.90 INC VAT£124.08 EX VAT | 
 | Pair of chrome reverse cone mega type silencers supplied with shims to allow fitment to a variety of models. Adjustable mounting bracket and clamp included. You may need to modify brackets or fabricate your own depending upon which model you have | | quantityadd to basket
| Dimensions: 38mm to 45mm ID. 442mm Length. Mounting Bracket 150mm. 1 in stock | | |
|
Page 3 of 14
|
Secure online shopping with SagePay 
