Shop headings: New Spares | Used Spares | Accessories | Brands
Piston ring compressing tool, compresses piston rings to fit into bore. Without this tool you risk snapping piston rings, the tool also speeds up the fitting of new rings
For 57mm - 125mm bores, supplied with hex key for bore adjustment. Not suitable for CARC models
This part is available by special order, request a quote
£48.00
INC VAT
£40.00 EX VAT 
Dimensions:
72mm OD
Rear crank oil seal
Fits Nevada 750 from engine LT017877 and Nevada 350 from PC053625. NB Original specification 12mm seal no longer in production, our seal is 10mm thick. Superceded by Guzzi ref. 886365
3 in stock
04000500-z 04000500 GU04000500 04 00 05 00
0400 0500 0400.0500 04.00.05.00
£13.20
INC VAT
£11.00 EX VAT
Dimensions:
38mm x 50 mm x 7mm
Rotational oil seal for crownwheel carrier in drive box on post 1974 big twins. Front crank oil seal on loop frame models
Also known as Guzzi ref. 90403850 and used on 850 GT and loop frame models for front crank oil seal ( 90403851 )
More than 5 in stock
90413850 GU90413850 90 41 38 50
9041 3850 9041.3850 90.41.38.50
£9.80
INC VAT
£8.17 EX VAT
Dimensions:
25mm x 40mm x 7mm
Oil seal used as camshaft oil seal on Daytona and Centauro and gearbox seal on CARC models.
Gearbox output shaft seal on late V7 models. Also known as Guzzi ref. 90412541, 825238, AP8560030
3 in stock
90412541 GU90412541 90 41 25 41
9041 2541 9041.2541 90.41.25.41
£13.20
INC VAT
£11.00 EX VAT
Oil pressure sensor
Also known as Guzzi ref. 1A011730
1 in stock
643090 MG643090
£17.00
INC VAT
£14.17 EX VAT
Oil pressure switch M10 thread
Supercedes Guzzi no. 1A014570
This part is due back in stock soon, call 01484 841395 to reserve yours
1A017929
£28.50
INC VAT
£23.75 EX VAT
Piston for oil pressure relief valve in lower crankcase
This part is due back in stock soon, call 01484 841395 to reserve yours
31150950 GU31150950 31 15 09 50
3115 0950 3115.0950 31.15.09.50
£12.00
INC VAT
£10.00 EX VAT
Dimensions:
120mm x 45mm diameter overall
UFI 25 531 00 cartridge oil filter for 1989 on small block engines. See TOA19001 for a inexpensive tool to loosen and tighten the dipstick
For an oil change we also recommend 1x ENA90444 (Oil filter cover O ring), 1 x SIA10070 (large sump drain crush washer), 1 x SIA10900 (small sump drain crush washer) and 1 x SIA12200 (filter cover crush washer). Some 750 XPA models use SIA19530, we advise you to check your old filter before ordering. Also known as Guzzi ref. 2A000633
More than 5 in stock
27153085 GU27153085 27 15 30 85
2715 3085 2715.3085 27.15.30.85
£9.50
INC VAT
£7.92 EX VAT
Dimensions:
20.6mm x 2.6mm
O ring used on cylinder head, gearbox input shaft and output shaft on big twins
Used in bevel box on small twins. Also known as Guzzi ref. 2A000270
More than 5 in stock
90706203 GU90706203 90 70 62 03
9070 6203 9070.6203 90.70.62.03
£1.00
INC VAT
£0.83 EX VAT
Dimensions:
17.12mm x 2.62mm
Black O ring
Many applications including clutch pushrod plunger O ring at rear of gearbox
More than 5 in stock
90706170 GU90706170 90 70 61 70
9070 6170 9070.6170 90.70.61.70
£0.80
INC VAT
£0.67 EX VAT
Secure online shopping 
