The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Cali 3 Cali 1100 1994-1997 Clutch

This section contains all clutch parts including friction plates and springs

Sort by Title

Sort by Price

Page 1 of 5

1 2 3 4 5

RAM Clutch Kit Upgrade

CLA20305 Fits 850 GT, V7 Sport, S3, 750S, 850/1000 ALL Models

Complete single disc clutch kit for 5 speed big twins containing flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. Suitable for all big twins with either distributor or crankshaft mounted ignition system, not suitable for Digiplex equipped models.

This clutch upgrade has the following advanges over the old two plate clutch:

Reduction in flywheel and clutch weight of approx. 1KG
Improved acceleration
Smoother gear changes at high RPM
Quicker engine decelleration
Reduction in engine vibration as the clutch assembly is (this is not possible with the original clutch)
Lighter handlebar clutch lever action
More precise clutch engagement and disengagement.
More progressive clutch engagement.
Increased ability to handle higher torque and horsepower.
Lower clutch disk wear (reduced maintenance)
Fewer parts (no intermediate plate, no second friction plate) to wear out
Ease of assembly - gearbox can be fitted to engine without centering of the clutch disk.

Kits are complete as shown including: flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. See CLA30399 for replacement clutch plate. See the expoded diagram on our technical documents page for more information about this part. Please note you will need 6 M8 Schnorr washers ENA14901 which are not included in the kit. See ENA37705 for replacement flywheel bolts

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

£495.00

INC VAT

£412.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Flywheel

ENA17670 Fits T3, T4, Spada ALL, G5, Mille GT, Cal 2, Strada 1000, T5, Cali 3 (small and medium valve), 1000S (series 2)

Dimensions:
230mm diameter

Flywheel, originally intended for dual point and Motoplat ignitions

2-33° of ignition advance. Supercedes V7 loop frame flywheel 12067000 . Weighs 4.2kg

This part is available by special order, request a quote

17067050 GU17067050 17 06 70 50
1706 7050 1706.7050 17.06.70.50

£249.00

INC VAT

£207.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Kit Updated Splined Centre

CLA20302 Fits 850 GT, V7 Sport, S3, 750S, 850/1000 ALL Models, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, Centauro, Daytona

Clutch plate kit consisting of 2 x friction plates, 1 x intermediate plate, deep splined clutch centre / boss and tabbed lock washer (not shown). For models with the early type shallow spline plates this is a worthwhile upgrade kit to the better deep splined centre and plates. Clutch plate alignment tool also available, see TOA30510. Suitable for all 5 speed dual plate clutch models

Save £20 on the cost of these components if bought seperately. Does not include clutch springs (see CLA13100). Thicker side of each friction plate should face transmission

part in stock 1 in stock

£186.50

INC VAT

£155.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Brembo Handlebar Master Cylinder PS13

CLA03145 Fits V7 Sport, S3, 750S, 850/1000 ALL Models, Cali 1100, Cali EV, Cali Stone, Cali Jackal, 1100 Sport ALL, Daytona, Centauro

Brembo PS 13 handlebar mounted clutch master cylinder, supplied complete with lever.

This part is available by special order, request a quote

£175.00

INC VAT

£145.83 EX VAT this is the price you will pay if you are ordering from outside the UK

RAM Clutch Replacement Friction Plate

CLA30399 Fits 1100 Sport ALL, V11 Sport ALL, Daytona, Centauro, Cali EV (1997-2006), 850 GT, V7 Sport, S3, 750S, 850/1000 ALL Models, Cali 1100 (1994-1997

Replacement clutch plate for single plate RAM clutches

Torque setting for fitting this is 25Nm with a thread locking compound

This part is available by special order, request a quote

£146.00

INC VAT

£121.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Centering Tool

TOA30510 Fits 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, Spada 3, V11 Sport ALL, Le Mans 1000 (from engine VV016375), Mille GT (from engine VT024596), Cali 3 (from engine VT032542), Daytona, Centauro, Cali Vintage, Bellagio, Daytona, Centauro, Breva 850, Breva 1100, Griso 850, Griso 1100, Norge (2v/cyl), 1200 Sport (2v/cyl)

Splined tool for aligning clutch plates on reassembly, without this clutch alignment tool you risk damaging the intermediate plate. The tool screws into the back of the crankshaft to compress the clutch springs and align the clutch friction plates

Suitable only for later clutch centre spline type (e.g. clutch plate CLA05430). As used by the Gutsibits spanner monkeys on their bikes

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

30906510 GU30906510 30 90 65 10
3090 6510 3090.6510 30.90.65.10

£110.00

INC VAT

£91.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Magura Clutch Lever Support

CLA29605 Fits Cali 3, V65 Florida

Black clutch lever support for models with Magura switchgear

This part is available by special order, request a quote

29605550 GU29605550 29 60 55 50
2960 5550 2960.5550 29.60.55.50

£79.40

INC VAT

£66.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Centre Deep Spline

CLA30810 Fits Strada 1000, 1000S, Spada 3, Le Mans 1000 (from engine VV016375), Mille GT (from engine VT024596), Cali 3 (from engine VT032542), Daytona, 1100 Sport ALL, Cali 1100 (1994-1997), Quota ALL, Centauro, 1000S, Cali EV, Cali Stone, Cali Jackal, Cali Vintage

Deep splined clutch hub / gear for later models, requires deep splined clutch plates CLA05430. Can be retro fitted to earlier 850/1000 models

Kit CLA20302 available separately containing all required parts to upgrade early shallow splined clutches to later improved specification

This part is available by special order, request a quote

30081810 GU30081810 30 08 18 10
3008 1810 3008.1810 30.08.18.10

£78.00

INC VAT

£65.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Centre Nut Tool

TOA14903 Fits V7 Sport, 850 GT, 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, Cali Jackal, Cali Stone, Centauro, Daytona, 1100 Sport, Quota 1100, Breva 1100, Breva 1200, Griso 850, Griso 1100, 1200 Sport (2006-2007), Norge ALL

Factory tool for clutch centre gear nut, this is a superior design tool intended for repeated use

Designed to fit the original factory spec nut- this may not fit some aftermarket items. See TOA14651 for cheaper aftermarket tool

This part is available by special order, request a quote

14912603 GU14912603 14 91 26 03
1491 2603 1491.2603 14.91.26.03

£70.00

INC VAT

£58.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Domino Clutch and Choke Lever Assembly

CLA27515 Fits 750 SP, Strada 750, Nevada 750 (1991-1993), NTX 650, Spada 3, Le Mans 1000 (Domino switchgear), Mille GT (series 2), NTX 350, Cali 3 (Domino switchgear)

Complete black Domino clutch lever, handlebar clamp and choke lever assembly. Includes clutch cable adjuster and M10 mirror boss

Also known as Guzzi ref. 30605530

This part is available by special order, request a quote

27605515 GU27605515 27 60 55 15
2760 5515 2760.5515 27.60.55.15

Also fits Cagiva T4 350, Moto Morini EXCALIBUR 350, Moto Morini EXCALIBUR 501

£59.00

INC VAT

£49.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 1 of 5

1 2 3 4 5