Combined regulator rectifier to replace separate items on Bosch equipped models. See our wiring instructions page for help installing this reg/rec.
Supplied with long leads for battery and alternator connection. Female spades for alternator and charge sensing, ring connectors for battery. NB this reg/rec should not be used with a lithium-ion battery
1 in stock
£140.00
INC VAT
£116.67 EX VAT
Pair of polished aluminium exhaust flanges. These will work with any Guzzi downpipes but work particularly well with Mistral downpipes which don't require exhaust collets
See ENA90718 for exhaust gaskets
1 in stock
£85.00
INC VAT
£70.83 EX VAT
1 litre of Millers 80w-90 mineral based transmission oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals
An extreme pressure differential oil SAE 80w90 mineral based differential oil with performance additives. Use as received in Hypoid differentials requiring extreme pressure lubricants and GL5 specification.
Provides performance level specified by manufacturers for gearboxes and final drives.
Used as gearbox oil and final drive oil in 5 speed 850, 1000 and 1100 models. For CARC unit / bevel boxes on 850 and larger Breva, Norge, Griso, Stelvio, 1200 Sport and Cali 1400 models. Can also be used as gearbox oil on these models. For gearbox only on small twins. API GL-5
Quantities required:
More than 5 in stock
£12.00
INC VAT
£10.00 EX VAT
The Mistral footrest kit offers a much improved foot position for the pillion by lowering the footrest to immediately above the silencer. By extending the leg position, pillion passengers feel more secure and touring comfort is much improved. This reasonably priced Mistral footrest kit is made close to the Guzzi factory in Mandello and looks as good as any stock part. Fitting is simple using the original attachments (springs, bolts, etc.).
Silver painted finish. Compatible with both Mistral and stock silencers. Kit contains components to lower both pillion footrests and includes shims to remove excess movement. See this video for installation instructions.
1 in stock
£80.00
INC VAT
£66.67 EX VAT
Kit of 4 black frame caps to tidy up the bolt heads for the pillion and exhaust footpeg hanger
Simple installation, lasting looks
2 in stock
£15.00
INC VAT
£12.50 EX VAT
Pair of sintered EBC FA095 HH brake pads for Brembo 5165 single pin four piston calipers
With the highest friction rating and a lifetime which is the envy of other Brake Pad Manufacturers, the Double-H pads are now available in a new quieter running, faster bedding formulation. NB if opting for sintered pads use them all round. We advise checking your front caliper(s) have one not two pad pins
2 in stock
30654602-z 30654602 GU30654602 30 65 46 02
3065 4602 3065.4602 30.65.46.02
£24.40
INC VAT
£20.33 EX VAT
Pair of sintered EBC FA256 HH rear brake pads
High performance sintered pads with twin pin pin fitting. Pre 2012 V7 models use a different brake pad with only one pad pin hole. Also known as Guzzi ref 2R000248
1 in stock
AP8133798
£22.50
INC VAT
£18.75 EX VAT
8 sided UFI 23 287 00 cartridge oil filter with sealing rubber.
From late 2015 onwards 1200 models used SIA06428
See SIA15301 for alternative filter from Mahle. Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 8 sided oil filter. Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump
See ENA90948 for the oil filter cover o ring
More than 5 in stock
30153000 GU30153000 30 15 30 00
3015 3000 3015.3000 30.15.30.00
£10.00
INC VAT
£8.33 EX VAT
Marelli condenser with cable and mount bracket
2 required
More than 5 in stock
14715433 GU14715433 14 71 54 33
1471 5433 1471.5433 14.71.54.33
£10.50
INC VAT
£8.75 EX VAT
Stainless steel exhaust stud kit consisting of 4 x studs, 4 x dome head nuts, 4 x wavy washers and 4 x flat washers
On pre-1998 models we recommend combining with a pair of new exhaust polished aluminium flanges - EXA30032
More than 5 in stock
96508040 GU96508040 96 50 80 40
9650 8040 9650.8040 96.50.80.40
£21.00
INC VAT
£17.50 EX VAT