Right hand Moto Guzzi emblem for rocker cover

 1 in stock

 976560 MG976560

Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes.

 1 in stock

Tinted standard size screen with mounting holes and beaded edge

Mount this screen using the following parts: FAA60001A (chrome) or FAA60001G (black) + upper arms FAA60001D
See FAA60001B if you just need the screen mounting screws.
To simplify installation always mount a screen on to the mounting brackets before mounting the brackets on the bike

 1 in stock

 18577350 GU18577350 18 57 73 50
 1857 7350 1857.7350 18.57.73.50

Large tinted screen with chrome edging

Use fitting kit FAA60008.
To simplify installation always mount a screen on to the mounting brackets before mounting the brackets on the bike.
Note that due to the tight radius of the chome trim the finish may not be perfectly smooth

 1 in stock

 29577350 GU29577350 29 57 73 50
 2957 7350 2957.7350 29.57.73.50

Standard grey tinted screen for headlamp fairing. Includes screen edge trim.

Fitting kits available separately. Screen fasteners are FAA98417 x 3, FAA04001 x 6, FAA90035 x 3, FAA92104 x 3

 2 in stock

14577250-z 14577250 GU14577250 14 57 72 50
 1457 7250 1457.7250 14.57.72.50

Dellorto 8.5g float with tang for needle valve

Most Guzzi big twins originally had 10g floats- see FUA14001

 3 in stock

 14933000 GU14933000 14 93 30 00
 1493 3000 1493.3000 14.93.30.00

Pair of chrome tubular rocker cover protector bars for round and square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped

These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet. These bars are supplied with a plastic grommet for each end, this will need chamfering or leaving off on round head models with bolt on rocker cover breather pipes, e.g. T3. These bars will not fit on a T3 or other model with knee pads

 1 in stock

Pair of black tubular rocker cover protector bars for round and square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped

These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet. These bars are supplied with a plastic grommet for each end, this will need chamfering or leaving off on round head models with bolt on rocker cover breather pipes, e.g. T3. These bars will not fit on a T3 or other model with knee pads

 1 in stock

Chromed fork stanchion

 2 in stock

39525401-z 39525401 GU39525401 39 52 54 01
 3952 5401 3952.5401 39.52.54.01

Also fits Benelli 504

Manual right hand petrol tap with nut. On, Off and Reserve settings.

Will also fit most other Moto Guzzi tanks from 1976 to 1991, these can be used to replace discontinued electric taps but please measure first and check you have space for outlet pipe

 More than 5 in stock

65105401-z 65105401 GU65105401 65 10 54 01
 6510 5401 6510.5401 65.10.54.01

Also fits Laverda Jota