Brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals and O ring to seal the two halves together
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
More than 5 in stock
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£18.00
INC VAT
£15.00 EX VAT
Single replacement caliper piston for Brembo P2 F09 or P9 caliper as fitted to Spada rear.
NB you will require a pair of these. Also used on Benelli Sei rear. Corresponding caliper seal kit is BRA54722
2 in stock
20391310 GU20391310 20 39 13 10
2039 1310 2039.1310 20.39.13.10
Also fits Benelli 900 Sei Rear (1983), Laverda 1000 RGS Fronts (1984)
£20.00
INC VAT
£16.67 EX VAT
Pair of Brembo 07BB1408 carbon ceramic brake pads for Brembo P2 F08 (P8) calipers
For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers
More than 5 in stock
28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01
Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£31.50
INC VAT
£26.25 EX VAT
Rotor bolt for Bosch alternator
Not previously available from Guzzi. May also be used on a Saprisa alternator
3 in stock
14712459 GU14712459 14 71 24 59
1471 2459 1471.2459 14.71.24.59
£7.50
INC VAT
£6.25 EX VAT
Stainless steel tool for removing Bosch alternator rotor. Will also fit Saprisa.
Simply screw in until the rotor pops off
5 in stock
Also fits Benelli Sei 900 (Series 2)
£6.60
INC VAT
£5.50 EX VAT
Replacement alternator brushes or brush kit for Bosch alternators
Also known as Guzzi ref 17712453
More than 5 in stock
14712453-z 14712453 GU14712453 14 71 24 53
1471 2453 1471.2453 14.71.24.53
Also fits Benelli 900 Sei (Series 2)
£10.00
INC VAT
£8.33 EX VAT
Brush holder for Bosch alternator stator
Also known as Guzzi ref. 17712454, 14712452
Includes brushes. See ELA17453
1 in stock
17712452 GU17712452 17 71 24 52
1771 2452 1771.2452 17.71.24.52
£68.30
INC VAT
£56.92 EX VAT
High quality German made Mahle OE quality cartridge oil filter with sealing rubber.
From late 2015 onwards 1200 models used SIA06428
Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 14 sided oil filer which is compatible with our oil filter tools TOA41005 and TOA01200. This Mahle filter is shorter that the equivalent UFI filter. See ENA90948 for the oil filter cover o ring
More than 5 in stock
30153000 GU30153000 30 15 30 00
3015 3000 3015.3000 30.15.30.00
£9.25
INC VAT
£7.71 EX VAT
Workshop manual for V85 TT models covering maintenance, overhaul and detailed repair. Note that engine overhaul is covered in a separate supplement - BOA85383
Includes tolerances for many parts, maintenance schedule and exploded diagrams. This is a comb bound reprint
1 in stock
2Q000400
£32.00
(VAT exempt)
£32.00 EX VAT
Guzzi Factory Workshop Manual for Breva 750. 280 pages covering the basics or maintenance and rebuilding for the Breva 750. Includes sections on technical specifications, maintenance, fuel system, engine, gearbox, transmission, electrics, cycle parts and chassis
Includes basic test data for electrical parts including TPS
1 in stock
£28.00
(VAT exempt)
£28.00 EX VAT