Black spark plug cap, this does not include the 90 degree bend or HT lead but is significantly cheaper than the genuine part
For models with 4 valves per cylinder, with the very easily damaged internal plug caps.
Also known as suppressor cap.
NOT for models with 2 valves per cylinder.
See ELA18134 for HT leads, although these come with different plug caps.
2 in stock
883028 MG883028
£10.00
INC VAT
£8.33 EX VAT
8 sided UFI 23 287 00 cartridge oil filter with sealing rubber.
From late 2015 onwards 1200 models used SIA06428
See SIA15301 for alternative filter from Mahle. Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 8 sided oil filter. Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump
See ENA90948 for the oil filter cover o ring
More than 5 in stock
30153000 GU30153000 30 15 30 00
3015 3000 3015.3000 30.15.30.00
£10.00
INC VAT
£8.33 EX VAT
Round plastic bulb holder for instrument warning lights.
Supercedes Guzzi ref. 10754905. For bulb LIA93140
3 in stock
19768680 GU19768680 19 76 86 80
1976 8680 1976.8680 19.76.86.80
£12.00
INC VAT
£10.00 EX VAT
Threaded adaptor connecting oil line to cylinder head
Fits to ENA14660
2 in stock
14153660 GU14153660 14 15 36 60
1415 3660 1415.3660 14.15.36.60
£13.80
INC VAT
£11.50 EX VAT
The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models
Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!
3 in stock
£26.50
INC VAT
£22.08 EX VAT
The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models
Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!
3 in stock
£26.50
INC VAT
£22.08 EX VAT
Brembo caliper cover for models with obsolete twin bleed calipers
P9 caliper cover includes cutout each side for bleed nipple. Also known as Guzzi ref. 14654700, 17654760. Please note you may need to trim away the four moulded lugs at the bottom of the cover otherwise these may clash with your pad pins
More than 5 in stock
20325410 GU20325410 20 32 54 10
2032 5410 2032.5410 20.32.54.10
£11.00
INC VAT
£9.17 EX VAT
Input shaft oil seal for gearbox
More than 5 in stock
90403245 GU90403245 90 40 32 45
9040 3245 9040.3245 90.40.32.45
£9.00
INC VAT
£7.50 EX VAT
Titanium shouldered retaining screw for rocker cover. 4 required for each cylinder head
Rocker cover bolt for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.
More than 5 in stock
887483 MG887483
£7.50
INC VAT
£6.25 EX VAT
Premium softstyle royal blue T-shirt printed with classic Moto Guzzi logo in white on the chest.
Rear of shirt features our 'What do you mean you've only got one neutral'?! design - Guzzi riders know all about this!
Sizing:
More than 5 in stock
£18.00
INC VAT
£15.00 EX VAT