Black spark plug cap, this does not include the 90 degree bend or HT lead but is significantly cheaper than the genuine part

For models with 4 valves per cylinder, with the very easily damaged internal plug caps.
Also known as suppressor cap.
NOT for models with 2 valves per cylinder. See ELA18134 for HT leads, although these come with different plug caps.

 2 in stock

 883028 MG883028

Brembo caliper cover for models with obsolete twin bleed calipers

P9 caliper cover includes cutout each side for bleed nipple. Also known as Guzzi ref. 14654700, 17654760. Please note you may need to trim away the four moulded lugs at the bottom of the cover otherwise these may clash with your pad pins

 More than 5 in stock

 20325410 GU20325410 20 32 54 10
 2032 5410 2032.5410 20.32.54.10

Titanium shouldered retaining screw for rocker cover. 4 required for each cylinder head

Rocker cover bolt for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.

 More than 5 in stock

 887483 MG887483

High quality German made Mahle OE quality cartridge oil filter with sealing rubber.

From late 2015 onwards 1200 models used SIA06428

Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 14 sided oil filer which is compatible with our oil filter tools TOA41005 and TOA01200. This Mahle filter is shorter that the equivalent UFI filter. See ENA90948 for the oil filter cover o ring

 More than 5 in stock

 30153000 GU30153000 30 15 30 00
 3015 3000 3015.3000 30.15.30.00

One metre of copper core HT lead, this is superior to the more commonly available carbon core lead

Sold by the metre, one metre is enough for two leads on most models with coils under the fuel tank. For models with coils under the side panel you will need two metres. See ELA14715 and ELA14714 for plug caps and ELA20001 for coil screw cap. See ELA00001 for crimp on HT lead connector

 More than 5 in stock

Pair of black Ariete rubber fork gaiters for 32mm forks

 2 in stock

Rotational oil seal for crownwheel carrier in drive box on post 1974 big twins. Front crank oil seal on loop frame models

Also known as Guzzi ref. 90403850 and used on 850 GT and loop frame models for front crank oil seal ( 90403851 )

 More than 5 in stock

 90413850 GU90413850 90 41 38 50
 9041 3850 9041.3850 90.41.38.50

Air filter, flat paper cartridge type

See SIA85433 for a reusable K & N air filter

 More than 5 in stock

AP8104329

5 pin mini relay

Also known as Guzzi ref. 30732560 Can be used in place of 4 pin mini relay ELA01561. We recommend keeping a spare one in your tool kit

 More than 5 in stock

 01731760 GU01731760 01 73 17 60
 0173 1760 0173.1760 01.73.17.60

Drive box input seal

Pinion oil seal

 More than 5 in stock

90403251-z 90403251 GU90403251 90 40 32 51
 9040 3251 9040.3251 90.40.32.51