The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

New Spares Recently Back In Stock

Sort by Title

Sort by Price

Page 16 of 21

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Automatic Bleed Valve M8 Bleed Nipple

BRA41654 Fits Breva 750, Nevada 750 (1998-2016), V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone

Dimensions:
M8 x 1

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function on this auto bleed valve, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover. Fits front calipers only on models listed above.
2 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Breather Pipe

ENA27980 Universal Part

Dimensions:
1000mm x 16mm x 9mm

Single 100cm length of pipe used for oil return and breather applications depending on model. Can be used as gearbox breather on Tonti 5 speed gearboxes

Use hose clip FUA00004

part in stock More than 5 in stock

823956080

£8.00

INC VAT

£6.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Exhaust Clamp Downpipe Stainless Steel Mikalor

EXA36901 Fits V7 700, 850 GT, V7 Special (1969-1971), 1000S, Cali 1100, Cali EV, G5, Cali 2, Cali 3, Le Mans 3, Mille GT, Spada ALL, 850T, T3, T4, T5, V65 Florida, V65 GT, V65 Polizia, V75 PA, 750 Targa, Strada 750, 750 SP, Breva 750, V7 Classic, Strada 1000

Dimensions:
40 - 43mm ID

Mikalor stainless steel downpipe and balance box exhaust clamp

part in stock More than 5 in stock

14126900 GU14126900 14 12 69 00
1412 6900 1412.6900 14.12.69.00

£6.60

INC VAT

£5.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Wheel Bearing

WHA92217 Fits Nuovo Falcone, Breva 750, Nevada 750, Nevada 350, Strada 750, Quota 1100, V65 ALL, V7 Classic, V7 Racer, V7 Special, V7 Cafe (2008-2016), V7 II Racer, V7 II Special, V7 II Stone, V35 I, V35 II, V50 I, V50 II, V50 3, Monza

Dimensions:
40mm OD

Wheel bearing

1 required for rear wheel, 2 for front wheel except on Nuovo Falcone where two are used in rear wheel. Check parts book or call for exact applications

part in stock More than 5 in stock

92204217 GU92204217 92 20 42 17
9220 4217 9220.4217 92.20.42.17

Also fits Royal Enfield Himalayan (Rear)

£10.00

INC VAT

£8.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Flasher Unit Round

ELA17520 Fits 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75, Nevada ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, V11 Sport, Daytona, Centauro, 1100 Sport

Dimensions:
32mm diameter

Round 12v two pin flasher relay

See FRA17720 for rubber mount

part in stock More than 5 in stock

17750520 GU17750520 17 75 05 20
1775 0520 1775.0520 17.75.05.20

£7.60

INC VAT

£6.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Wheel Bearing

Dimensions:
40mm OD

Wheel bearing

1 required for rear wheel, 2 for front wheel except on Nuovo Falcone where two are used in rear wheel. Check parts book or call for exact applications

part in stock More than 5 in stock

92204217 GU92204217 92 20 42 17
9220 4217 9220.4217 92.20.42.17

Also fits Royal Enfield Himalayan (Rear)

£10.00

INC VAT

£8.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Factory Workshop Manual

BOA32215 Fits Breva 750

Dimensions:
A4 - 280 pages

Guzzi Factory Workshop Manual for Breva 750. 280 pages covering the basics or maintenance and rebuilding for the Breva 750. Includes sections on technical specifications, maintenance, fuel system, engine, gearbox, transmission, electrics, cycle parts and chassis

Includes basic test data for electrical parts including TPS

part in stock 1 in stock

£28.00

(VAT exempt)

£28.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Exhaust Clamp Downpipe Stainless Steel Mikalor

Dimensions:
40 - 43mm ID

Mikalor stainless steel downpipe and balance box exhaust clamp

part in stock More than 5 in stock

14126900 GU14126900 14 12 69 00
1412 6900 1412.6900 14.12.69.00

£6.60

INC VAT

£5.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Seal

GEA90435 Fits V7 700, V7 Special, 850 GT, V7 Sport, 750S, S3, 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, Cali Stone, Cali Jackal, Cali Vintage, 1100 Sport ALL, Centauro, Quota 1100, V35 ALL, V50 ALL, V65 ALL, Nevada 750 (1991-1997), 750 SP, Strada 750, 750T, 750 Targa, Nuovo Falcone, V7 700, V7 Special (1969-1971), Nuovo Falcone, Bellagio, Daytona, Centauro, Griso 850, Griso 1100, Norge (2v/cyl), 1200 Sport (2v/cyl), Breva ALL, V7 Cafe, V7 Racer, V7 Special, V7 Stone, V7 Classic, V7 II, V7 III ALL

Dimensions:
47mm OD

Gearbox input seal and output shaft oil seal on big twins, fork seal on Nuovo Falcone. Used as crownwheel shaft oil seal on small twins. Output seal only on 4 speed gearboxes

Supercedes Guzzi ref. 90403547. Used as crownwheel carrier seal on small twins Also known as Guzzi ref. 90403549

part in stock More than 5 in stock

90403548 GU90403548 90 40 35 48
9040 3548 9040.3548 90.40.35.48

£18.50

INC VAT

£15.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Front Wheel Spindle Nut and Washer Kit

SSA92516 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), 1100 Sport carb, V35 ALL, V50 ALL, V65 ALL, Nevada 350, Nevada 750

Dimensions:
M16

M16 stainless steel half nut and washers for front wheel spindle. Includes flat and wavy washer

NB this is a half nut. Can also be used as alternator retaining nut 92603516

part in stock More than 5 in stock

92602516-z 92602516 GU92602516 92 60 25 16
9260 2516 9260.2516 92.60.25.16

£8.50

INC VAT

£7.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 16 of 21

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21