New type clutch friction plate for models with deep splines with deep splined centre
2 plates required- thicker side of each friction plate should face transmission.
Also known as Guzzi ref. 30084410, 03084400, 29084450
V11 Tenni, Rosso Mandello and Scura have a single plate clutch which uses a different friction plate (unfortunately out of production)
These can be fitted to earlier 850 and 1000 models if the early shallow splined clutch centre is replaced with the later deep splined type. See our kit CLA20302 to update early 850/1000 models. Clutch plate alignment tool also available, see TOA30510
4 in stock
05084430 GU05084430 05 08 44 30
0508 4430 0508.4430 05.08.44.30
£57.70
INC VAT
£48.08 EX VAT
Manual left hand petrol tap with nut. On, Off and Reserve settings.
Will also fit most other Moto Guzzi tanks from 1976 to 1991, these can be used to replace discontinued electric taps but please measure first and check you have space for outlet pipe
More than 5 in stock
65105400-z 65105400 GU65105400 65 10 54 00
6510 5400 6510.5400 65.10.54.00
Also fits Laverda Jota. Can be used on Morini 350 Sport and Morini 350 Strada as replacement for electronic fuel tap
£12.50
INC VAT
£10.42 EX VAT
5 pin 12 volt relay suitable for starter, lights, indicator, flasher and horn applications
Supercedes Guzzi ref. 12732500. Equivalent to 28732500 but with mounting bracket
More than 5 in stock
19732500-z 19732500 GU19732500 19 73 25 00
1973 2500 1973.2500 19.73.25.00
£15.20
INC VAT
£12.67 EX VAT
Pair of black steel brackets for mounting the nose cowling FAA14575
Requires a hex head bolt for the headlight fixing e.g. SSA08016 (depending on headlight)
2 in stock
14578651-z 14578651 GU14578651 14 57 86 51
1457 8651 1457.8651 14.57.86.51
£39.00
INC VAT
£32.50 EX VAT
Head gasket
3 in stock
19022000 GU19022000 19 02 20 00
1902 2000 1902.2000 19.02.20.00
£10.00
INC VAT
£8.33 EX VAT
Throttle cable, runs from twistgrip to carb
Ball end at twistgrip
2 in stock
13117565-z 13117565 GU13117565 13 11 75 65
1311 7565 1311.7565 13.11.75.65
£11.00
INC VAT
£9.17 EX VAT
Footrest rubber, lattice patterned
Used for pillion and / or riders footrest depending on model. NB some T3 models use FRA14443 for pillion footrest rubber, check your bike before ordering
More than 5 in stock
14443200-z 14443200 GU14443200 14 44 32 00
1444 3200 1444.3200 14.44.32.00
£15.00
INC VAT
£12.50 EX VAT
Stainless steel braided hose oil lines for heads on square barrel models. See ENA14662 if you also need threaded link to cylinder head
Always replace crush washers (SIA12200 x 2 and SIA10900 x 2) when replacing oil lines, you may also require our banjo bolt ENA95990. Also known as Guzzi ref. 01153600 and 01153602
5 in stock
14153660 GU14153660 14 15 36 60
1415 3660 1415.3660 14.15.36.60
£53.00
INC VAT
£44.17 EX VAT
Rocker spindle
2 in stock
12031800 GU12031800 12 03 18 00
1203 1800 1203.1800 12.03.18.00
£22.00
INC VAT
£18.33 EX VAT
Large rear battery strap with metal clip
3 in stock
14705500-z 14705500 GU14705500 14 70 55 00
1470 5500 1470.5500 14.70.55.00
£11.00
INC VAT
£9.17 EX VAT