Complete (rev counter) tacho cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 More than 5 in stock

19768100-z 19768100 GU19768100 19 76 81 00
 1976 8100 1976.8100 19.76.81.00

High quality German made Mahle OE quality cartridge oil filter with sealing rubber.

From late 2015 onwards 1200 models used SIA06428

Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 14 sided oil filer which is compatible with our oil filter tools TOA41005 and TOA01200. This Mahle filter is shorter that the equivalent UFI filter. See ENA90948 for the oil filter cover o ring

 More than 5 in stock

 30153000 GU30153000 30 15 30 00
 3015 3000 3015.3000 30.15.30.00

Full workshop manual for ABS equipped V7 III models covering maintenance, overhaul and detailed repair. Note that this manual does not include detailed engine overhaul

Includes tolerances for many parts, maintenance schedule and exploded diagrams. This is a comb bound reprint

 2 in stock

2Q000297

Oil pressure sender

See SIA10900 for replacement crush washer if required. Also known as Guzzi and Piaggio refs. 32768710, AP0956169, AP8550512, 486051, 58076R, 826161, 641541, AP9150414. Requires thread adapter ELA88123 to fit to 4 valves per cylinder big twins

 4 in stock

 32768710 GU32768710 32 76 87 10
 3276 8710 3276.8710 32.76.87.10

Also fits Aprilia 1000 RSV4 RF , BJ 2017 -, Aprilia 1000 RSV4 RR , BJ 2016 - 2016, Aprilia 1000 RSV4 RR , BJ 2017 -, Aprilia 1000 Tuono , BJ 2003 - 2003, Aprilia 1000 Tuono Fighter , BJ 2002 - 2005, Aprilia 1100 Tuono V4 RF , BJ 2017 - 2019, Aprilia 1100 Tuono V4 RR , BJ 2016 - 2017, Aprilia 1100 V4 Tuono Factory , BJ 2017 -, Aprilia 125 RS4 , BJ 2017 -, Aprilia 125 RS4 Replica , BJ 2017 - 2018, Aprilia 125 Tuono , BJ 2017 -, Aprilia 900 Dorsoduro , BJ 2017 -, Aprilia 900 Shiver , BJ 2017 -, Aprilia Atlantic 500-,

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   4 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Pair of chromed Hepco and Becker pannier rails for Hepco and Becker panniers. Supplied with fitting hardware and chromed cross brace

Pair pannier racks

 1 in stock

Brembo caliper cover for models with obsolete twin bleed calipers

P9 caliper cover includes cutout each side for bleed nipple. Also known as Guzzi ref. 14654700, 17654760. Please note you may need to trim away the four moulded lugs at the bottom of the cover otherwise these may clash with your pad pins

 More than 5 in stock

 20325410 GU20325410 20 32 54 10
 2032 5410 2032.5410 20.32.54.10

Single 100cm length of neoprene rubber pipe used for oil breather applications depending on model. Can be used as fuel pipe on carb bikes. Also see FUA00011 as alternative for this pipe

Use hose clip FUA00004

 More than 5 in stock

Metal bush for foot brake or gear lever pivot

 3 in stock

 30678160 GU30678160 30 67 81 60
 3067 8160 3067.8160 30.67.81.60

Aluminium float chamber nut for VHB 29 and VHB 30 carbs

 2 in stock

 13933700 GU13933700 13 93 37 00
 1393 3700 1393.3700 13.93.37.00