Dimensions:
M10 conventional thread, approx. 240mm reach to far edge of mirror, mirror 110mm diameter
Black handlebar mounted mirror. Conventional M10 thread, head is threaded for left or right hand fitment.
Supercedes BUMM mirror HAA36021W. See ACA00101 for a black mirror extender kit to extend the reach of this mirror.
4 in stock
£18.00
INC VAT
£15.00 EX VAT
90 degree angle drive box for speedo and tacho cables, screws into rear of clock
Fits all 850/1000 models. Also known as cable gearbox
3 in stock
17768360 GU17768360 17 76 83 60
1776 8360 1776.8360 17.76.83.60
£35.00
INC VAT
£29.17 EX VAT
Quality cruiser screen from Puig for your Guzzi. Made from 3mm High Impact Acrylic and supplied with durable handlebar fittings this screen will help keep the weather off for years to come. Adjustable fittings enable this to be fitted to a range of models.
Suitable for models with 22mm and 28mm diameter handlebars (not those with 'T Bars' like the Cali Aluminium and Bellagio)
1 in stock
£130.00
INC VAT
£108.33 EX VAT
12 volt ignition coil for models equipped with points, Bosch or Motoplat ignition systems, includes HT lead. Terminal layout is different to original coils- see photos.
Not for Digiplex models. Also known as Guzzi ref. 19716500, 19716520
5 in stock
31716560 GU31716560 31 71 65 60
3171 6560 3171.6560 31.71.65.60
£38.10
INC VAT
£31.75 EX VAT
Pair of Brembo 07BB1408 carbon ceramic brake pads for Brembo P2 F08 (P8) calipers
For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers
More than 5 in stock
28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01
Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£31.50
INC VAT
£26.25 EX VAT
Fork seal for Marzocchi fork
Two fork types are used on recent small twins, we recommend checking your old fork seal before opening. These seals are for the Marzocchi fork. Also known as Guzzi ref. 599501 and 01530569
5 in stock
27530584 GU27530584 27 53 05 84
2753 0584 2753.0584 27.53.05.84
Also fits Aprilia RS125 (2006-2010), Aprilia, RX-SX 125 (2008-2010), Gilera Nexus 500 E3 (2006-2008), Piaggio, X9 500 Evolution (2006-2007)
£10.80
INC VAT
£9.00 EX VAT
The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.
Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:
1 in stock
£33.00
INC VAT
£27.50 EX VAT
The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.
Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:
1 in stock
£33.00
INC VAT
£27.50 EX VAT
Titanium shouldered retaining screw for rocker cover. 4 required for each cylinder head
Rocker cover bolt for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.
More than 5 in stock
887483 MG887483
£7.50
INC VAT
£6.25 EX VAT
Premium softstyle royal blue T-shirt printed with classic Moto Guzzi logo in white on the chest.
Rear of shirt features our 'What do you mean you've only got one neutral'?! design - Guzzi riders know all about this!
Sizing:
4 in stock
£18.00
INC VAT
£15.00 EX VAT