The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop

New Spares Recently Back In Stock

Sort by Title

Sort by Price

Page 9 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Gearbox Layshaft Locknut

GEA10100 Fits V35 ALL, V50 ALL, V65 ALL, V75, 750 Targa, Strada 750, 750 SP, 750T, 750X, Nevada 750, Breva 750

Dimensions:
13mm ID, 22mm across flats

Gearbox locknut, one nut fitted to each end of the layshaft

part in stock 1 in stock

10054100 GU10054100 10 05 41 00
1005 4100 1005.4100 10.05.41.00

£11.50

INC VAT

£9.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Gaiter Universal Joint

TRA23080 Fits Breva 750, Nevada 750 ALL, Nevada 350, Imola 2, V35 Florida, V35C, V50C, Monza 2, V65 Florida, Lario, NTX 650, V65 GT (series 2), V65 TT, V7 Classic, V7 Cafe, V75, 750 Targa, Strada 750, 750X, 750 SP, V7 Classic, V7 Stone, V7 Racer, V7 II ALL, V7 III ALL

Dimensions:
narrow end 50mm ID, wide end 65mm ID x 40mm long

Black rubber UJ boot / gaiter

See TRA23101 for clip

part in stock 2 in stock

23548080-z 23548080 GU23548080 23 54 80 80
2354 8080 2354.8080 23.54.80.80

£14.00

INC VAT

£11.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Throttle Cable

CAA076CC Fits Le Mans 1000 (1988-1992), 1000S

Dimensions:
Inner length 1000mm, 915mm outer length,

Throttle cable from Handlebar splitter to carb, one cable per carb. For models with standard high top PHF pumper carbs.

Only suitable for 1988 on Le Mans 4 & 5 models. We advise you to measure your existing cable before ordering in case you have a non standard set up.

part in stock 3 in stock

28117778 GU28117778 28 11 77 78
2811 7778 2811.7778 28.11.77.78

£14.00

INC VAT

£11.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 6mm Stainless Steel

SSA00470 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT, Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL

Dimensions:
10mm threaded shank, 8mm across flats

A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787

See BRA36794 for rubber cap

part in stock More than 5 in stock

Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,

£8.00

INC VAT

£6.67 EX VAT this is the price you will pay if you are ordering from outside the UK

HT Lead Copper Core

ELA18135 Universal Part

Dimensions:
100cm

One metre of copper core HT lead, this is superior to the more commonly available carbon core lead

Sold by the metre, one metre is enough for two leads on most models with coils under the fuel tank. For models with coils under the side panel you will need two metres. See ELA14715 and ELA14714 for plug caps and ELA20001 for coil screw cap. See ELA00001 for crimp on HT lead connector

part in stock More than 5 in stock

£7.00

INC VAT

£5.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Throttle Cable

CAA076CC Fits Le Mans 1000 (1988-1992), 1000S

Dimensions:
Inner length 1000mm, 915mm outer length,

Throttle cable from Handlebar splitter to carb, one cable per carb. For models with standard high top PHF pumper carbs.

Only suitable for 1988 on Le Mans 4 & 5 models. We advise you to measure your existing cable before ordering in case you have a non standard set up.

part in stock 3 in stock

28117778 GU28117778 28 11 77 78
2811 7778 2811.7778 28.11.77.78

£14.00

INC VAT

£11.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Pressure Switch

ELA19670 Fits 850/1000 ALL Models, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Cali Stone, Cali Jackal, Cali Vintage, Centauro, Daytona, Quota 1100, V11 Sport ALL, V35 ALL, V50 ALL, V7 Sport, S3, 750S, V7 700, 850 GT, Nuovo Falcone

Dimensions:
M12 thread, 46mm x 21mm bolt flats

Oil pressure sender, M12 thread, male bullet connector

Supercedes Guzzi no. 12768700. Some small twins also require adapter 19055800 (or ELA19720 can be fitted in place of this switch). Check which type your small twin uses before replacing.

See ENA12640 for replacement crush washer if required

part in stock More than 5 in stock

17768750 GU17768750 17 76 87 50
1776 8750 1776.8750 17.76.87.50

£10.00

INC VAT

£8.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Crank Oil Seal Rear

ENA90367 Fits V7 Sport, 750 S3, 750S, V7 700, V7 Special (1969-1971), 850 GT, 850/1000 All Models, 1100 Sport ALL, 1200 Sport, Centauro, Daytona, Quota ALL, Cali 1100 (1994-1997), Cali EV, V35 ALL, V50 ALL, V65 ALL, V75 ALL, Strada 750, 750 Targa, 750 SP, Nevada 350 (1991-1998), Nevada 750 (1991-1998), V11 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Stelvio, Norge, Griso, Cali 1400 ALL

Dimensions:
68mm OD

Rear crankcase oil seal or rear main oil seal.

Fits Nevada 750 up to engine LT017877 and Nevada 350 to engine PC053625. Also known as Guzzi ref. 90405368. We recommend replacing the rear crank oil seal when replacing the clutch

part in stock More than 5 in stock

90405367-z 90405367 GU90405367 90 40 53 67
9040 5367 9040.5367 90.40.53.67

£14.00

INC VAT

£11.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Crank Oil Seal Front

ENA90428 Fits 1100 Sport ALL, Bellagio, V7 Sport, 750S, S3, 850T, Cali 2, T3, T4, Convert, G5, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Mille GT, Nevada 750 (1991-2001), Quota ALL, 1000 SP, SP II, V11 Sport, V35 ALL, V50 ALL, V65 ALL, 750 Targa, 750T, Strada 750, Lario, Centauro, Daytona, Cali 1100 (1994-1997), Cali EV