Pair of short reverse cone stainless steel performance silencers from Mistral, the reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
5kg lighter that stock silencers
Increased power
Euro 5 compliant
No remap required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers.You will also need centre stand stop bracket FRA34373 if you have the Guzzi centre stand fitted.
Silencer shims not required
Release the music in your Guzzi!
This part is available by special order, request a quote
£750.00
INC VAT
£625.00 EX VAT
This adjustable fuelling modifier uses the lambda sensor signal to the ECU. By modifying that signal it achieves an improvement in low and midrange throttle response. Comes with wiring harness and instruction manual, installation is simple and does not require any specialist tools. Suitable for all single throttle body V7, V9 and V85 TT models.
Rapid Bike EASY: A base level simple plug and play modulator equipped with a microprocessor managing the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate power gaps typical of the low and medium rpm range.
See installation instructions here.
1 in stock
£149.00
INC VAT
£124.17 EX VAT
Pair of universal Domino chromed handlebars, medium rise.
Not suitable for V65 GT, Mille GT or other models with wide handlebar clamps - see dimensions if in doubt about suitability for your bike
1 in stock
£48.00
INC VAT
£40.00 EX VAT
Pair of engine crash bars finished in tough black. The heads and rocker covers are vulnerable on these bikes and can be badly damaged by even a minor accident, replacement cost can be more than £1000 so protect your bike with these bars.
Supplied with fitting hardware and bracket finished in black, this crashbar has been specially developed for the second generation V7. See our technical documents section for installation instructions. Engine bars - essential protection for your bike.
1 in stock
£160.00
INC VAT
£133.33 EX VAT
Spacer for swinging arm. Two required.
This part is due back in stock soon, call 01484 841395 to reserve yours
12547200 GU12547200 12 54 72 00
1254 7200 1254.7200 12.54.72.00
£12.00
INC VAT
£10.00 EX VAT
HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434
Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
This part is available by special order, request a quote
£150.00
INC VAT
£125.00 EX VAT
Satin finish Avion performance silencer. Full deep sound enhances the V-twin engine note and you'll appreciate the extra 2hp that is released. It's also a full kilo lighter than the stock part. Distinctive Avion styling and shorter length compliments the V100 Mandello. Includes carbon fibre heat shield.
Mistral focused the development on the technical details that characterize this exhaust, performing something of unique. Thanks to a different internal construction Mistral saved about 1 kilogram compared to the stock silencer and improved performance, not that the bike was lacking but more fluidity and torque is always a good thing to have. The final endcap, totally milled from a block of aluminum, ensure an unique and valuable look that combined with the carbon fibre heat shield match perfectly the sportly character of the bike.
This part is available by special order, request a quote
£435.00
INC VAT
£362.50 EX VAT
Bright finish CAT eliminator crossover and downpipe assembly. Fit for increased power and torque through the rev range.
Peak power increase of 4hp at 9000 RPM and torque increase of 5lb-ft at 3500rpm. Reduced weight and heat for improved comfort in summer. No remapping required, compatible with factory centre stand.
This part is available by special order, request a quote
£695.00
INC VAT
£579.17 EX VAT
Complete chrome indicator with clear lens and wiring lead, includes orange bulb
Fits front left or rear right, plastic stem. Also known as Guzzi ref. 06751600
This part is due back in stock soon, call 01484 841395 to reserve yours
32751660-z 32751660 GU32751660 32 75 16 60
3275 1660 3275.1660 32.75.16.60
£42.00
INC VAT
£35.00 EX VAT
Complete chrome indicator with clear lens and wiring lead, includes orange bulb
Fits front right or rear left, plastic stem
1 in stock
32750660-z 32750660 GU32750660 32 75 06 60
3275 0660 3275.0660 32.75.06.60
£42.00
INC VAT
£35.00 EX VAT