Performance deCAT kit for EURO5 models containing a set of big bore header pipes and 2-1 connecting pipe (H pipe) without CAT. The big bore downpipes improve exhaust gas flow resulting in improved torque and power though the rev range. The dowpipes are 50% lighter than the originals and combined with the 2kg weight saving from the mid pipe you'll see a noticable weight saving. Also available with a CAT by special order - enquire for details. This kit will also improve the exhaust note but for optimum results combine with a Mistral performance silencer and air filter SIA85433. We also recommend fitting a V-Twin Boost plug-in FUA85001 with this CAT eliminator to enrichen the mixture

• No remapping required
• CNC exhaust flanges included
• Significant weight saving
• Top spec AISI304 stainless steel (no rust!)
• Y piece is compatible with original heat shields and lambda probes
• Installation with graphite bushings to limit the transmission of vibrations
• Fixing bracket with antivibration silent block
• Straight through design for better performance and deeper sound
• Larger diameter internals for better exhaust gas flow
• Crossover is compatible with original system components
• Reduces engine operating temperature for better fuel consumption and efficiency
• Includes exhaust bushes (normal cost £30) and exhaust header gaskets
• Manufactured on the shores of Lake Como and developed using a rolling road

 1 in stock

Full workshop manual for Cali EV models covering maintenance, overhaul and detailed repair

Includes tolerances for many parts. This is a bound reprint in English which also covers models equipped with hydraulic tappets (PI models)

 Order now and we will post your order within 7 days.

Chrome fuel filler cap, supplied with lock barrel and keys.

Also known as Guzzi ref. 03103950, 03103900, 32103961, 32103960, 883185.

 Sorry, this part is no longer available.

03103970-z 03103970 GU03103970 03 10 39 70
 0310 3970 0310.3970 03.10.39.70

Bright finish CAT eliminator crossover and downpipe assembly. Fit for increased power and torque through the rev range.

Peak power increase of 4hp at 9000 RPM and torque increase of 5lb-ft at 3500rpm. Reduced weight and heat for improved comfort in summer. No remapping required, compatible with factory centre stand. See ENA01393 for exhaust gaskets (not included).

 This part is available by special order, request a quote

Polished replica adjustable aluminium brake lever for PS 16 and PS 22 handlebar master cylinders. Can also be fitted as an adjustable update to Breva 750, Nevada 750 (2004 on) , V7 Classic , V7 Cafe etc... Note that this lever blade is approximately 20mm shorter than the OE lever.

Also known as Guzzi ref. 981050 and 854603. BRA03645 can be used as a non adjustable substitute

 1 in stock

AP8133510

Also fits Aprilia Caponord, Aprilia Pegaso 650 (CHASSIS NUMBER PREFIX: ZD4VD0,ZD4VDA,ZD4VDB,ZD4VDD,ZD4VDE 2005-2009), Aprilia Futura 1000 (2001-2003)

Shallow splined Newfren clutch friction plate for big twins with old shallow splined clutch centre

2 plates required per clutch overhaul- thicker side of each plate should face transmission. Also check your intermediate plate 12082300. This has shallower splines than the Spada 3 on plates. These are the best fit if you still have the original shallow spline clutch hub

 This part is available by special order, request a quote

28084460-z 28084460 GU28084460 28 08 44 60
 2808 4460 2808.4460 28.08.44.60

Pair of black Hepco and Becker pannier rails for Hepco and Becker panniers

Pair pannier racks

 This part is available by special order, request a quote

Ball bearing for drive box output side

 1 in stock

 92201070 GU92201070 92 20 10 70
 9220 1070 9220.1070 92.20.10.70

Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.

 1 in stock

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11

Pair of Hepco and Becker engine crash bars finished in black. The heads and rocker covers are vulnerable on these bikes and can be badly damaged by even a minor accident, replacement cost can be more than £1000 so protect your bike with these bars.

Supplied with fitting hardware and instructions. See this link for installation instructions

 This part is available by special order, request a quote