Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick

To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate

 This part is available by special order, request a quote

Front main bearing flange

 This part is available by special order, request a quote

 14011900 GU14011900 14 01 19 00
 1401 1900 1401.1900 14.01.19.00

Kit containing all the parts required for the steering stem mounted steering damper rod fitted to the V7 Sport and Le Mans 1. Contains: adjuster knob, rod, spring, spacers and bushes

Use with SUA14201 which actually damps the steering action

 This part is available by special order, request a quote

14515901-z 14515901 GU14515901 14 51 59 01
 1451 5901 1451.5901 14.51.59.01

Pair of chromed front crash bars, these attach under the headstock and to the lower framerails

Use 2 x SSA12080 for lower mounting bolts, see FRA17750 for mounting plate and 2 x SSA08025 for upper mounting bolts

 1 in stock

17450200-z 17450200 GU17450200 17 45 02 00
 1745 0200 1745.0200 17.45.02.00

Polished aluminium alternator cover

This is the deeper alternator cover which is suitable for models with Ducati and Saprisa charging systems. See SSA06030 for stainless steel mounting bolts (4 required)

 This part is due back in stock soon, call 01484 841395 to reserve yours

18001650-z 18001650 GU18001650 18 00 16 50
 1800 1650 1800.1650 18.00.16.50

Rectifier / diode board for Bosch charging systems. High quaility replacement part sourced from Germany

See our Bosch fault finder page for help diagnosing problems on your Bosch charging system.

 This part is due back in stock soon, call 01484 841395 to reserve yours

17704300-z 17704300 GU17704300 17 70 43 00
 1770 4300 1770.4300 17.70.43.00

Replacement alternator rotor for Bosch systems

See ELA17400 for matching stator and TOA14008 for rotor removal tool. We recommend changing the timing cover oil seal ENA90428 when changing the rotor. Also fits Yamaha RD350, FZR1000 and 1000 Fazer. Note that new rotors may need energizing, see our faultfinder for details.

 1 in stock

Also fits Benelli 900 Sei (Series 2)

Chrome twin pull Tommaselli 2c twist grip. Includes a pair of handlebar grips, for bikes with dual throttle cables from the bars

As originally fitted to pre 1979 T3's. Not suitable for carbs larger than 36mm (the twistgrip inner will require minor modification to operate PHM40s). This twistgrip can be used on almost any model with suitable custom cables. See ACA14450 for spare rubber. Holes for throttle cable elbow may be smaller than the original and need carefully enlarging with a drill or round file.

 1 in stock

 14603450 GU14603450 14 60 34 50
 1460 3450 1460.3450 14.60.34.50

Fuel filler cap supplied with rubber seal

Does not fit early V7 Sport tanks with 54mm aperture

 Availability varies on this part, check availability

13103960-z 13103960 GU13103960 13 10 39 60
 1310 3960 1310.3960 13.10.39.60

Also fits Ducati 350/500 Twin, Ducati 350/500 Twin GTV, Ducati 350/500 Twin Sport, Ducati 450 Desmo, Ducati 500 Sport Desmo, Ducati 750 GT/Sport, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Laverda, Triumph T140 (Meriden)

Domino left hand switchgear with lights on - park - off, high and low beam, pass, indicator and horn switches. Same style switch as ELA01738.

Already wired in to 9 pin block connector (you may need to alter the wiring on your bike to correspond to this block connector). Originally fitted as standard to early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear. See Greg Bender's website for a custom sub-loom that enables easy fitting of this part to models previously fitted with LEGO style swithgear

 1 in stock

 01738030 GU01738030 01 73 80 30
 0173 8030 0173.8030 01.73.80.30