High performance Quadflex maintenance free Motobatt 12 volt 14Ah battery. Quadflex technology means you have two positive and two negative threaded terminals allowing maximum flexibility when installing. Motobatt absorbed gel matting batteries feature the latest absorbent glass mat technology. This offers increased lifespan, higher vibration resistance and electrical performance. This battery is also leak, vibration and spill proof if installed correctly.

NB this battery is physically smaller than the OE battery fitted to the Quotas

200 CCA.
4 x M6 terminals
Supplied charged and ready to fit with terminal brackets and button head screws.
NB This battery must not be trickle charged or charged using a traditional manual charger, AGM batteries require a smart charger - we recommend ACA96000
For more information on charging AGM batteries see these FAQ's.

If parking your bike up for several weeks we recommend disconnecting one battery terminal to prevent battery drain, this should ensure your bike will start once you are ready to use it again. Replaces YTX12BS, YTX14BS, YTX14LBS, KMX14BS, YTX15LBS and Odyssey PC545. Replaces Guzzi ref. 638733, this battery is for small twins with a single throttle body

One year warranty on all our Motobatt batteries

Also available at the same price in black by special order - call 01484 841395 to order. If you need more performance than a standard AGM battery offers see hybrid battery ELA59015 which ouputs 330 CCA for starting the highest performance twins

Please note this part CANNOT be posted outside of the UK mainland area

 1 in stock

 638733 MG638733

Domino left hand switchgear with lights on - park - off, high and low beam, pass, indicator and horn switches. Same style switch as ELA01738.

Already wired in to 9 pin block connector (you may need to alter the wiring on your bike to correspond to this block connector). Originally fitted as standard to early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear. See Greg Bender's website for a custom sub-loom that enables easy fitting of this part to models previously fitted with LEGO style swithgear

 1 in stock

 01738030 GU01738030 01 73 80 30
 0173 8030 0173.8030 01.73.80.30

Left hand Domino type switchgear with high and low beam, pass, indicator and horn switches. Same style switch as ELA01738

On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. An indication of wire colours is supplied with this switchgear. Supplied with 9 pin block connector. NB does not have lights off - park - on function, you need this to be on your RH switch (e.g. ELA01729 ) or run lights always on

 This part is available by special order, request a quote

Stylish headlamp guard for your V85 TT. Protects your headlamp and adds to that pukka off road look. Fitted in minutes

 This part is available by special order, request a quote

Stylish fibreglass Imola fairing ideal for your home built Guzzi cafe racer. Supplied unpainted and undrilled. Brackets and screen not included.

Designed to work with 750SS / 900SS screen. See CFA00076 for a screen and LIA97595 for a compatible LED headlight

 This part is available by special order, request a quote

079703958

Also fits Ducati 750/900 SS & SSD

Classically styled humped race seat unit with built in number plate hanger and recess for tail light ideal for your home built cafe racer. Supplied unpainted and undrilled. This seat pan is designed for early Tonti frames but may fit other models with appropriate modifications

Mounting brackets and seat cushion not included

 This part is available by special order, request a quote

Classically styled humped race seat unit ideal for your home built cafe racer. Supplied unpainted and undrilled. This seat pan is designed for early Tonti frames but may fit other models with appropriate modifications

Mounting brackets and seat cushion not included

 This part is due back in stock soon, call 01484 841395 to reserve yours

Hyperpro lower spring for rear shock. The black spring lowers the rear end of bike by 25mm to help you feel more comfortable on the bike. The front forks can also be dropped through the yokes to make the fitment of this spring a handling neutral change.

For the complete package see SUA85004 for a lowering kit for the forks

 This part is available by special order, request a quote

Set of billet aluminium head protectors to help protect your bike in the event of a fall or slide. Made in Mandello del Lario

These bolt through the rocker cover using the supplied bolts and spacers

 This part is available by special order, request a quote

The Mistral V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's. The V85 TT runs particularly lean and will benefit more than most bikes from the installation of a V-Twin Boost.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory!

• Quick and easy installation
• Resistant to atmospheric agents and vibrations
• Optimized by Mistral for your bike
• Best response to the opening of the throttle
• Better torque at low-medium range
• Reduction of the on/off effect
• Correct air/fuel ratio in all conditions with real-time modification

 1 in stock