Shop headings: New Spares | Used Spares | Accessories | Brands
148 Results - Page 14 of 15
Dimensions:
10mm threaded shank, 11mm across flats, 3mm OD at base, 18mm from tip to underside of flats
Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.
Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap
More than 5 in stock
£7.80
INC VAT
£6.50 EX VAT
Rear brake master cylinder, foot operated. Brembo no longer offer overhaul kits for recent models so this is your only option if your master cylinder is faulty.
This part is available by special order, request a quote
AP8133643
Also fits Aprilia Caponord 1000 (2004-2007), Aprilia Pegaso 650 (2005-2009)
£203.00
INC VAT
£169.17 EX VAT
Rear brake master cylinder, foot operated. Brembo no longer offer overhaul kits for recent models so this is your only option if your master cylinder is faulty.
This part is available by special order, request a quote
2B000508
£132.00
INC VAT
£110.00 EX VAT
Brembo PS 11 handlebar mounted front master cylinder. This replaces the PS 12 master cylinder which is no longer available. The PS11 has a small rectangular fluid reservoir
Supplied complete with adjustable lever and pivot pin cover. Also known as Guzzi ref. 28660178. Uses switch ELA30860. See BRA28278 for a suitable alternative master cylinder
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
7 in stock, request a quote
30660160 GU30660160 30 66 01 60
3066 0160 3066.0160 30.66.01.60
Prices from
£24.00 - £75.00
inc VAT dependent on condition
Pair of EBC FA209 brake pads, used for front brake pads on Quota and Bellagio, rear brake pads for Cali 1400, Cali EV, Cali Stone, Cali Jackal and Special. All use Brembo PF2.3032 caliper
Also known as Guzzi ref. 30654626, AP8113627
5 in stock
03654600-z 03654600 GU03654600 03 65 46 00
0365 4600 0365.4600 03.65.46.00
£18.90
INC VAT
£15.75 EX VAT
A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
More than 5 in stock
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£8.00
INC VAT
£6.67 EX VAT
M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits in corrosion resistant grade 5 titanium as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
Availability varies on this part, check availability
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£7.00
INC VAT
£5.83 EX VAT
Brembo PS 16 rear master cylinder for models with a remote reservoir, suitable as a replacement for the standard PS15 master cylinder which has now been discontinued by Brembo. Mounting holes at 50mm centres
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
Sorry, this part is no longer available.
19667000 GU19667000 19 66 70 00
1966 7000 1966.7000 19.66.70.00
Prices from
£36.00 - £75.00
inc VAT dependent on condition
Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats
Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models
Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.
5 in stock
£8.20
INC VAT
£6.83 EX VAT
Pair of sintered EBC FA244HH front brake pads for P4 30/34 F calipers with two pad pins (Brembo 6800 and 9970 calipers). Sintered pads offer improved braking performance but will wear your discs more quickly than organic pads
Guzzi pad reference is 01654630. Also fitted to some pre 2001 Cali EV's - check how many pins your brake caliper has if ordering for a 1997-2001 Cali EV. Also known as Guzzi ref. 2B003313, 61340211A, 01654630, 07670810, 07BB1935, AP8133614, 883673, 2B005736
2 in stock
32654610 GU32654610 32 65 46 10
3265 4610 3265.4610 32.65.46.10
£25.00
INC VAT
£20.83 EX VAT