Front brake manifold, black. Takes two brake lines and brake light switch

Brembo ref. 06.2783.00

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 We need to check whether we have stock of this part, check availability

 17656850 GU17656850 17 65 68 50
 1765 6850 1765.6850 17.65.68.50

Two way proportioning valve for brake system

Brembo code 17.3338.01

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 Sorry, this part is no longer available.

 597912 MG597912

Single pin goldline Brembo right hand front caliper

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 1 in stock, request a quote

 30652302 GU30652302 30 65 23 02
 3065 2302 3065.2302 30.65.23.02

Caliper rebuild kit for Brembo P9 calipers. This contains the 2 fluid seals, 2 dust seals, 2 bolts and the caliper half O-ring

This seal kit is for 48mm pistons. F09 / P9 caliper only originally used for rear applications. Also used on Benelli Sei rear

 This part is due back in stock soon, call 01484 841395 to reserve yours

Brembo PS 13 handlebar mounted clutch master cylinder. Suitable for use with our hydraulic clutch conversion ACA77610

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 1 in stock, request a quote

Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts

This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110

See BRA10310 for less expensive replica kit

 4 in stock

 14659000 GU14659000 14 65 90 00
 1465 9000 1465.9000 14.65.90.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Brembo left hand (if mounted in front of fork leg) P08 / F08 ( P8 ) twin bleed (M6 bleed nipples) brake caliper

Also used on period Laverda and Ducati models

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 2 in stock, request a quote

 14652200 GU14652200 14 65 22 00
 1465 2200 1465.2200 14.65.22.00

Black cast aluminium cap and plastic seal for PS 15 Brembo master cylinder reservoir, this type does not have a level switch. Can be fitted to front or rear PS15 master cylinder reservoirs

This design was originally fitted to 850T, V7 Sport, 750S and S3 but will all fit all listed models. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Black Brembo brake lever

Can be used instead of adjustable lever BRA81510 for Breva 1200, 1200 Sport, Norge etc... Will also fit Cali EV (2002-2006), Breva 750, Nevada 750 (2004-2013), mk 1 V7 models, all V7 III, all V9's, Cali Stone and Cali Vintage

 1 in stock

2B001926

Brembo caliper cover for models with P2 F08 (P8) single bleed nipple calipers

You may need to immerse the cover in warm water before fitting

 4 in stock

 17654760 GU17654760 17 65 47 60
 1765 4760 1765.4760 17.65.47.60