Wheel bearing

1 required for rear wheel, 2 for front wheel except on Nuovo Falcone where two are used in rear wheel. Check parts book or call for exact applications

 5 in stock

 92204217 GU92204217 92 20 42 17
 9220 4217 9220.4217 92.20.42.17

Also fits Royal Enfield Himalayan (Rear)

Inlet rubber with HT lead guide. Fits between inlet manifold on cylinder head and throttle body or between throttle body and airbox

Also known as Guzzi ref. 03114370, 29114360. Use clip SSA45970.


Please note that if you are fitting this as a replacement to FUA30470 you may need to make some modification to the end of your airbox nozzle for a secure fit

 5 in stock

 30114370 GU30114370 30 11 43 70
 3011 4370 3011.4370 30.11.43.70

1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527

Fork seal

 More than 5 in stock

 30532861 GU30532861 30 53 28 61
 3053 2861 3053.2861 30.53.28.61

5 pin 12 volt relay suitable for starter, lights, indicator, flasher and horn applications

Supercedes Guzzi ref. 12732500. Equivalent to 28732500 but with mounting bracket

 More than 5 in stock

19732500-z 19732500 GU19732500 19 73 25 00
 1973 2500 1973.2500 19.73.25.00

Round 12v two pin flasher relay

See FRA17720 for rubber mount

 More than 5 in stock

 17750520 GU17750520 17 75 05 20
 1775 0520 1775.0520 17.75.05.20

Wheel bearing

1 required for rear wheel, 2 for front wheel except on Nuovo Falcone where two are used in rear wheel. Check parts book or call for exact applications

 5 in stock

 92204217 GU92204217 92 20 42 17
 9220 4217 9220.4217 92.20.42.17

Also fits Royal Enfield Himalayan (Rear)

Guzzi Factory Workshop Manual for Breva 750. 280 pages covering the basics or maintenance and rebuilding for the Breva 750. Includes sections on technical specifications, maintenance, fuel system, engine, gearbox, transmission, electrics, cycle parts and chassis

Includes basic test data for electrical parts including TPS

 1 in stock

Gearbox input seal and output shaft oil seal on big twins, fork seal on Nuovo Falcone. Used as crownwheel shaft oil seal on small twins. Output seal only on 4 speed gearboxes

Supercedes Guzzi ref. 90403547. Used as crownwheel carrier seal on small twins Also known as Guzzi ref. 90403549

 More than 5 in stock

 90403548 GU90403548 90 40 35 48
 9040 3548 9040.3548 90.40.35.48

Round 12v two pin flasher relay

See FRA17720 for rubber mount

 More than 5 in stock

 17750520 GU17750520 17 75 05 20
 1775 0520 1775.0520 17.75.05.20