Factory heated grip kit to keep your hands toastie warm all year round. Three heat levels, integrates with the V85 TT wiring and TFT dashboard. The grips are switched on by a button on the left hand switchgear. Fully compatible with fly by wire (unlike aftermarket grips).

Includes a complete heated twistgrip, heated grip for the clutch side and fitting instructions. The thottle has to be calibrated at an official Moto Guzzi dealer with the factory software after installation.

 This part is available by special order, request a quote

2S001325

Top Box Luggage Rack. High quality Italian made aluminium luggage rack designed to mount on top of the factory top box. All necessary fixings are included. Finished in black with cutouts for fixing bungees or strap

Perfect for increasing carrying capacity by strapping lightweight items (e.g. sleeping gear or clothing) to your top box. For maximum capacity combine with ACA00090 pannier top racks.

 This part is available by special order, request a quote

Black stainless steel conical silencer with brushed stainless steel end cap. Developed by Mistral for maximum performance using their in-house dyno. Hand made to order on the shores of Lake Como. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.7kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

Supplied with removable baffle. The baffle is easily removed by taking off the retaining circlip in the rear of the silencer. To achieve maximum performance gains also fit link pipe EXA85699, velocity stack EXA85901 and performance air filter SIA85433 with V-Twin boost plug-in FUA85001
Benefits of Mistral silencers:

• Simple assembly
• Low weight
• No remap required
• EURO4 approved
• Best sound and performance
• Specific bracket included
• Same position as the original exhaust: compatibility with side bags and Guzzi accessories
• Removable DB-Killer
• Specific carbon fiber heat shield included
• Handcrafted product
• More than 2hp gain

 This part is available by special order, request a quote

Polished stainless steel conical silencer. Developed by Mistral for maximum performance using their in-house dyno. Hand made to order on the shores of Lake Como. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.7kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

Supplied with removable baffle. The baffle is easily removed by taking off the retaining circlip in the rear of the silencer. To achieve maximum performance gains also fit link pipe EXA85699, velocity stack EXA85901 and performance air filter SIA85433 with V-Twin boost plug-in FUA85001

Benefits of Mistral silencers:

• Simple assembly
• EURO4 approved
• Low weight
• No remap required
• Best sound and performance
• Specific bracket included
• Same position as the original exhaust: compatibility with side bags and Guzzi accessories
• Removable DB-Killer
• Specific carbon fiber heat shield included
• Handcrafted product
• More than 2hp gain

 This part is available by special order, request a quote

Satin finish stainless steel conical silencer. Developed by Mistral for maximum performance using their in-house dyno. Hand made to order on the shores of Lake Como. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.7kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

Supplied with removable baffle. The baffle is easily removed by taking off the retaining circlip in the rear of the silencer. To achieve maximum performance gains also fit link pipe EXA85699, velocity stack EXA85901 and performance air filter SIA85433 with V-Twin boost plug-in FUA85001

Benefits of Mistral silencers:

• Simple assembly
• EURO4 approved
• Low weight
• No remap required
• Best sound and performance
• Specific bracket included
• Same position as the original exhaust: compatibility with side bags and Guzzi accessories
• Removable DB-Killer
• Specific carbon fiber heat shield included
• Handcrafted product
• More than 2hp gain

 This part is available by special order, request a quote

The Mistral V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's. The V85 TT runs particularly lean and will benefit more than most bikes from the installation of a V-Twin Boost.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory!

• Quick and easy installation
• Resistant to atmospheric agents and vibrations
• Optimized by Mistral for your bike
• Best response to the opening of the throttle
• Better torque at low-medium range
• Reduction of the on/off effect
• Correct air/fuel ratio in all conditions with real-time modification

 This part is due back in stock soon, call 01484 841395 to reserve yours

Stylish Italian made crash protection for your rear drive box or bevel box. FInished in a tough black nylon finish this guard protects your expensive drivebox from damage.

Supplied with basic fitting instructions and fitting hardware

 This part is available by special order, request a quote

Rear hugger finished in gloss black, this will protect your rear shock from road spray and grit. Mounts via three pre drilled holes and supplied brackets

Supplied with brackets and fasteners. See here for fitting instructions. Fitment of this hugger requires some mechanical skill- if in doubt please entrust this job to a professional

 Order now and we will post your order within 7 days.

Big bore headers made from high quality satin finish stainless steel. CNC exhaust flanges and gaskets included. Solves the corrosion problem of the original header pipes, these are also significantly lighter than the originals.

• Made from AISI304 stainless steel for EURO4 compliant models.
• Compatible with original crossover, heat shields and lambda sensors.
• Exhaust header gaskets included
• Manufactured on the shores of Lake Como and developed using a rolling road for optimum gas flow.

   This part is available by special order, request a quote

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

SW Motech fitting kit for fog light set ACA85213. These bike-specific mounts provide optimal positioning of the EVO lights, because they are developed exclusively for each motorcycle model. The sturdy elements made of powder-coated steel are screwed on to existing attachment points. They guarantee secure hold for the EVO lights, even when riding off-road. Please refer to the mounting instructions to determine if headlamps can be mounted standing, hanging and/or sideways on your motorcycle model.

Compatible with SW-MOTECH lights
Simple mounting on available attachment points
Bike-specific development ensures that lights fit perfectly
Corrosion protection thanks to the high-quality powder coating

 This part is available by special order, request a quote