Shop headings: New Spares | Used Spares | Accessories | Brands
Small round left hand bar end mirror finished in black. Knuckle allows adjustment of mirror. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.
Perfect for achieving that minimal look on your bike
Availability varies on this part, check availability
£30.90
INC VAT
£25.75 EX VAT
Black 55 litre Junior top box / top case to match Hepco and Becker Junior panniers. This is the classic Hepco and Becker top box design. Sized to take two helmets
This is a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This latches to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051
This part is available by special order, request a quote
£244.00
INC VAT
£203.33 EX VAT
Factory upgraded oil pump with 16mm wide teeth as fitted to later big twins. Gives increased flow and can be retro fitted to earlier 850/1000 models which originally had 14mm teeth pumps
This part is available by special order, request a quote
30146400 GU30146400 30 14 64 00
3014 6400 3014.6400 30.14.64.00
£245.00
INC VAT
£204.17 EX VAT
Pair of high performance Dyna 12 volt 5 ohm dual lead ignition coils with angled HT lead socket. These are a performance coil which offer improved starting and performance for twin plugged models
Dyna Performance Replacment twin plug coils are high tech, top quality coils, designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dynatek coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils. Dynatek coils work with factory electronic ignitions, points, and aftermarket ignitions.
These are a different size and shape from the original coils so you will need to fabricate a suitable coil mount. Guzziology recommends using electronic ignition with these coils as points may not be up to triggering these coils. See ELA00001 for crimp on HT lead connector.
Individual coils available by special order, call us for details
This part is available by special order, request a quote
1471650
£190.00
INC VAT
£158.33 EX VAT
Tough Xplorer top box / top case to match Hepco and Becker Xplorer panniers, ideal for enduro touring. Extremely endurable combination of aluminium sheet and coloured shock-resistant plastic.
This part is available by special order, request a quote
£375.00
INC VAT
£312.50 EX VAT
Complete sump kit which moves the oil filter out from within the sump to a recess under the sump. This simpifies and speeds up oil changes because the sump no longer needs to be removed. Oil cooling is also improved because oil will cool through the body of the filter. The complete sump kit is a simple fit that will speed up oil changes and reduce the risk of stripping crankcase bolts through repeated sump removal. It is very similar to the arrangement on modern CARC models. The kit consists of:
Depending on model you may need a longer dipstick e.g. ENA28495. You can calibrate the sump by adding 3l of oil and marking the position on the dipstick. Note that you need to transfer your oil pressure relief valve and the intake screen from your existing sump into this new one. Note also that the stamped steel covers on some oil pressure relief valves flare wider than others so you may need to make a little clearance in order to get the threads started. Also available at additional cost in black to special order
This part is available by special order, request a quote
£459.60
INC VAT
£383.00 EX VAT
Small Centenario decal celebrating 100 years of Moto Guzzi, as fitted to centenario models
This part is available by special order, request a quote
2H004121
£10.30
INC VAT
£8.58 EX VAT
Pair of stylish Kappa soft panniers, perfect for V7 and V9 models.
Order now and we will post your order within 7 days.
£168.00
INC VAT
£140.00 EX VAT
Dimensions:
measurements outside (HxWxD) cm 30 x 50 x 22 cm
inner measurements (HxWxD) cm 29 x 49 x 21 cm
Pair of black leather Buffalo panniers to fit Hepco and Becker C-Bow pannier frames. With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any bike. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.
Effective capacity of 21l, larger version also available - call for details
This part is available by special order, request a quote
£790.00
INC VAT
£658.33 EX VAT
Clamp on retro style bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors. Classic oval shape can be flipped for fitting on either side and above or below the handlebars.
The Reverse Retro mirror is made from billet aluminum. Compact, classy and unmistakable design. Simple lines make it a sought-after Classic suitable for a range of styles. The adjustment system and anti-dazzle glass guarantee optimal versatility and comfort.
Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted
Perfect for that classic cafe racer look
This part is available by special order, request a quote
£115.00
INC VAT
£95.83 EX VAT