Combined regulator rectifier to replace separate items on Bosch equipped models. See our wiring instructions page for help installing this reg/rec.

Includes harness extension with 6 spade connector block. NB this reg/rec should not be used with a lithium-ion battery

 Sorry, this part is no longer available.

Black PS 12 master cylinder (original round type). Supplied without lever. Currently unavailble- see BRA28278 for an alternative master cylinder.

Also known as Guzzi ref. 28660178, uses seal kit BRA14701 and lever BRA14605 (or BRA17606). Replaces Guzzi refs. 17660250, 17660252, 14660200, 082054335. Can be used to upgrade cable operated front master cylinder on V35 I, V50 I and V50 II models. also suitable for 750S

 This part is due back in stock soon, call 01484 841395 to reserve yours

 17660253 GU17660253 17 66 02 53
 1766 0253 1766.0253 17.66.02.53

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei

Complete reproduction Brembo P2 F05 (P5) front left hand brake caliper for small twins (when mounted behind fork leg)

Supplied without brake pads, see BRA19724 if you require these. Also known as Guzzi ref. 19652336 NLA March 2020

 Availability varies on this part, check availability

 82037805 GU82037805 82 03 78 05
 8203 7805 8203.7805 82.03.78.05

Also fits Benelli 250 TS

Brembo PS 15 rear master cylinder for models with a remote reservoir. Supplied with operating lever. Mounting holes at 50mm centres

Also known as Guzzi ref. also known as Guzzi ref. 30666960, 65660200, 10477665, 31666990. Brembo ref. 10.2934.02 Discontinued by Brembo- See BRA19001 for alternative part

 Sorry, this part is no longer available.

 19667000 GU19667000 19 66 70 00
 1966 7000 1966.7000 19.66.70.00

Clutch friction plate

Also known as Guzzi ref. 27084460

 3 in stock

32084410-z 32084410 GU32084410 32 08 44 10
 3208 4410 3208.4410 32.08.44.10

Pair of front crash bars in chome

Engine bars - essential protection for your bike. For fixings use 2 x SSA10045 and 2 x SSA08116

 This part is available by special order, request a quote

 19450200 GU19450200 19 45 02 00
 1945 0200 1945.0200 19.45.02.00

Pair of Wirth progressive fork springs

These progressive fork springs improve ride quality and handling by responding progressively to the road. The more the spring is compressed the harder it becomes preventing the forks from bottoming out. See OIA01001 for fork oil

 This part is available by special order, request a quote

 14526600 GU14526600 14 52 66 00
 1452 6600 1452.6600 14.52.66.00

Also fits Benelli Sei 750, Benelli Sei 900, Honda CB450 K1-5, CB500 K, CB500 4, Kawasaki KZ650 B/C, KH500, 750H, Z750, Z1000A1, Laverda 1000 RGS, Norton Commando, Yamaha RD250, RD350, XS650, TX750

Pair of Wirth progressive fork springs

These progressive fork springs improve ride quality and handling by responding progressively to the road. The more the spring is compressed the harder it becomes preventing the forks from bottoming out.

For 16 inch front wheel models. See OIA01001 for fork oil

 This part is available by special order, request a quote

Complete shallow bowl 193mm satin black LED headlight unit. Bright, neutral beam pattern will pass an MOT and illuminates the road much better than a halogen unit. Classic looks suit models from the Le Mans 1 to the V9

Fits Le Mans 1 headlamp cowling FAA99575. Also perfect for custom builds, cafe racers and specials. NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems. Neutral beam pattern and not E Marked.
Tried and tested on our bikes at Gutsibits

 This part is available by special order, request a quote

These clever spacers allow the fitting of the taper roller head bearings which are standard on later small twins in place of the often damaged and fiddly OE ball bearing races.The taper roller bearings last much longer and are easily replaced unlike the ball bearing races

This part consists of 2 x taper roller adapters and a pair of taper roller bearings, depending on the condition of your stem it may be necessary to shim the taper roller bearings. You may find that extra headlamp rubbers SUA39701 are required to take up the extra distance between the top and bottom yoke on the fork stanchions. See The Shed for instructions.

 Sorry, this part is no longer available.

 39515000 GU39515000 39 51 50 00
 3951 5000 3951.5000 39.51.50.00