The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function on this auto bleed valve, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover. Fits front calipers only on models listed above.
  
   1 in stock

  Dimensions:
  M8 x 1

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Round CEV amber indicator lens

Mounts using two screws (not supplied). Also known as Guzzi ref. 39753771 and 14753750. See LIG19759 for Larghi lenses, they are not interchangeable with this CEV lens

39753770-z 39753770 GU39753770 39 75 37 70
 3975 3770 3975.3770 39.75.37.70

Dimensions:
70mm overall diameter, 57mm mounting centres

Mikalor stainless steel downpipe and balance box exhaust clamp

 14126900 GU14126900 14 12 69 00
 1412 6900 1412.6900 14.12.69.00

Dimensions:
40 - 43mm ID

Swing arm taper roller bearing

2 races required per bike, supercedes unsealed bearing Guzzi ref. 92249217 and 92249216. See TRA90434 for oil seals

 92249213 GU92249213 92 24 92 13
 9224 9213 9224.9213 92.24.92.13

Dimensions:
40mm OD

Wheel bearing

1 required for rear wheel, 2 for front wheel except on Nuovo Falcone where two are used in rear wheel. Check parts book or call for exact applications

 92204217 GU92204217 92 20 42 17
 9220 4217 9220.4217 92.20.42.17

Also fits Royal Enfield Himalayan (Rear)

Dimensions:
40mm OD

Brakelight switch

Stop light switch also known as Guzzi ref. AP8224192
See FRA98412 for mounting screw

03749845-z 03749845 GU03749845 03 74 98 45
 0374 9845 0374.9845 03.74.98.45

Dimensions:
29mm x 24mm x 12mm excluding switch and spade connectors

1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

ENI oils were previously sold under the AGIP name. As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

Dimensions:
1 litre

Kit of 8 shock absorber bushes i.e. the correct quantity for one bike. These bushes do not use a metal central bush

Fits original fitment Koni and Ikon rear shocks.
Use this part in place of Le Mans 1, 2 and 3 seat hinge bush 10502250 (half of one kit required)

18551650-z 18551650 GU18551650 18 55 16 50
 1855 1650 1855.1650 18.55.16.50

Dimensions:
14mm internal diameter, 27mm external diameter

Pinion roller bearing for drive box

92249227-z 92249227 GU92249227 92 24 92 27
 9224 9227 9224.9227 92.24.92.27

Dimensions:
52mm OD

Mikalor stainless steel downpipe and balance box exhaust clamp

 14126900 GU14126900 14 12 69 00
 1412 6900 1412.6900 14.12.69.00

Dimensions:
40 - 43mm ID